David grays Panzer 111 build
-
- Posts: 2029
- Joined: Fri Nov 02, 2007 8:51 pm
- Location: new forest,hampshire,u.k.
- Been liked: 1634 times
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
- Robert E Morey
- Posts: 2299
- Joined: Wed Jul 18, 2007 12:59 am
- Location: Seattle, WA USA
- Has liked: 126 times
- Been liked: 755 times
-
- Posts: 1762
- Joined: Fri Jul 13, 2007 4:53 am
- Location: Northern California
- Been liked: 177 times
- Contact:
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
Made a bit more progress now both sides finished and bolted to the hull floor , glad the swing arms and guide blades are done , next the torsion bars where set to 40 degrees
didnt want to make the same mistakes as i did with my tiger
so i made a small jig and used my micro drill with a sanding disc
to get the flats on the torsion bars all the same , this worked
quite well next the wheeels to reprofiles and the tubes to add
didnt want to make the same mistakes as i did with my tiger
so i made a small jig and used my micro drill with a sanding disc
to get the flats on the torsion bars all the same , this worked
quite well next the wheeels to reprofiles and the tubes to add
-
- Posts: 2029
- Joined: Fri Nov 02, 2007 8:51 pm
- Location: new forest,hampshire,u.k.
- Been liked: 1634 times
-
- Posts: 1762
- Joined: Fri Jul 13, 2007 4:53 am
- Location: Northern California
- Been liked: 177 times
- Contact:
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time
- Adrian Harris
- Posts: 5062
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1371 times
- Been liked: 1567 times
Looking good David
I'll be interested to see how you tackle the wheels - do you have the flat ones from the first batch or the part-profiled ones from the second batch ?
Adrian.
I'll be interested to see how you tackle the wheels - do you have the flat ones from the first batch or the part-profiled ones from the second batch ?
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
- Posts: 289
- Joined: Tue Jul 24, 2007 7:22 pm
- Location: chesterfield derbyshire
- Been liked: 1 time