ROAD WHEELS
-
Graham Ord
- Posts: 249
- Joined: Mon Jul 16, 2007 11:15 am
- Location: BRIXHAM
- Has liked: 4 times
- Been liked: 16 times
ROAD WHEELS
How are the road wheel hub caps held on. The drawing has a 25mm pcd for the hole centres drilled through the flange but not through the 26mm spigot on the back which I presume fits into the 26 mm recess in the road wheel. The road wheels are not shown drilled and tapped. It does not seem to work out?
Graham
-
Roland Wallick
- Posts: 146
- Joined: Sun Jul 15, 2007 12:22 pm
- Location: MD United States
They are drilled all the way thru Gram but the holes are centered slightly in from the edge the edge. I guess it is to force them to wedge into the road wheel and hold the caps on by friction as part of the rivit will be mashed when the caps are fitted to the wheel.
I can send you a photo if you like.
I can send you a photo if you like.
If your not living on the edge, your taking up to much space.