P III Spare Wheel Carrier

steve winstone · Post by **steve winstone** » Mon Jan 25, 2010 6:44 pm

Hi All,

Thanks to Derek for letting me use his spare wheel carrier to get it cast, I am going to get castings in loss wax brass, I will be ordering only a small batch, if anyone is interested please email me, so I can judge how many to order. The approx cost would be around Â£10.00. This will be in a form of 2 brass castings and a steel centre post. My email is : steve.winstone@sky.com

Regards
Steve

[img][img]http://i260.photobucket.com/albums/ii37 ... /011-1.jpg[/img][/img]

Adrian Harris · Post by **Adrian Harris** » Mon Jan 25, 2010 7:02 pm

Hi Steve,

I presume two sets will be needed per tank ?

Adrian.

martin pitcairn · Post by **martin pitcairn** » Mon Jan 25, 2010 7:12 pm

ican i order 2 please,
thanks
martin

Ian Rodney · Post by **Ian Rodney** » Mon Jan 25, 2010 7:34 pm

Hi Steve,

Could you please put me down for two Pz III Spare Wheel Carriers.
I'll email you on above.

Cheers
Ian
from Glasgow, Scotland

Dale jordan · Post by **Dale jordan** » Mon Jan 25, 2010 7:49 pm

Hi Steve ... I'll have a set . Are you going to cast in the three holes in the base part to bolt it down onto the side fenders ??? Dale

Derek Attree · Post by **Derek Attree** » Mon Jan 25, 2010 9:25 pm

Hi Guys
It was a spare one that I had made so I am happy to share through Steve
with you all.
You need two per tank.
I drilled mine to clear 2.5 mm and used hex head bolts to hold them down.

Regards

Derek

steve winstone · Post by **steve winstone** » Mon Jan 25, 2010 9:38 pm

Hi Dale

Yes the holes will be drilled in, I did not want to alter Derek's part.When I get the castings in, I will drill and machine the bottoms of the castings.

Regards
Steve

vincent hung shu yue · Fri Jan 29, 2010 5:25 pm

Hi Steve
I would like a set.

clive Lockwood · Post by **clive Lockwood** » Thu Feb 04, 2010 11:18 pm

put me down too for a set steve, i did email you but i guess your quite busy just now.
Thanks.
clive

steve winstone · Post by **steve winstone** » Fri Feb 19, 2010 5:09 pm

Hi All,

The castings have arrive for the Spare Wheel Carrier, the cost will be Â£12.00 each, because of the cost of castings, apparently the brass has gone up

See photos below. If you are still interested please let me know as I only have a small batch of these.

Regards
Steve

[/img]

Stephen White · Post by **Stephen White** » Fri Feb 19, 2010 6:15 pm

Steve

I'd be grateful for two, to add to the tool boxes. They look great. Thanks.

Stephen

Sarah Frazer · Post by **Sarah Frazer** » Fri Feb 19, 2010 6:36 pm

Hi Steve,

I'll still have two please.

Regards,

Sarah

clive Lockwood · Post by **clive Lockwood** » Fri Feb 19, 2010 7:57 pm

Hi Steve, put me down for two.
thanks.
clive

David Da Costa · Post by **David Da Costa** » Sat Feb 20, 2010 4:33 pm

Put me down for two as well please.

David

Dale jordan · Post by **Dale jordan** » Wed Mar 03, 2010 1:39 am

Thanks Steve and Derek . My ones have just turned up they are sooooo good thankyou .....Dale