Kingtiger late-style tracks

[olaf piekenbrink]

Hello,

now I have available my track-links. I can offer You the following:

-Track-set, 115left/115right (96 + 14 spares per side), shim-set steel to add on pins, shim-set brass to adjust link-gap, pin-rod-lenghts from hard-brass to make pins and a 4,1mm long-drill to hone-out the holes.


for 2380 Euro + shipping.


Please allow 6 weeks for selection/packing/shipping.

The tracks are from heavy-duty steel/investment-casting, 100% accourate in every detail, exact 3D-copy from original item with minor adjusting to match the Amorteks Kingtiger geometry (please note: The amortek-Sproket-rings are not usable / does not match in diameter). The links come finished and sand-blasted, just to have a little drill-out with 4,1mm of the casted pin-hole to remove some stain and roughness.
Do not hesitate to ask me any question You may have and send me an email and I return You some pictures asap.

Email me to: op@piekenbrink.de


With kind regards, Olaf

[Kent Wiik]

Hi all,

I have seen picks of Olafs links and I must say they look wonderful!
Simply mind blowing and are probably the best looking aftermarket items I have ever seen.(please no offence all you other skilled aftermarket providers )

If you don’t mind Olaf here are some photos of your links for everyone to see and enjoy:
(simply to good to be missed...)





Cheers
Kent

[olaf piekenbrink]

Hello,

now I have available my track-links. I can offer You the following:

-Track-set, 115left/115right (96 + spares per side), shim-set steel to add on pins, shim-set brass to adjust link-gap, pin-rod-lenghts from hard-brass to make pins and 4,1mm long-drill to hone-out the pin-holes.


for 2380 Euro + shipping.


Please allow 6 weeks for selection/packing/shipping.

The tracks are from heavy-duty steel/investment-casting, 100% accourate in every detail, exact 3D-copy from original item with minor adjusting to match the Amorteks Kingtiger geometry (please note: The amortek-Sproket-rings are not usable / does not match in diameter). The links come finished and sand-blasted, just to have a little drill-out with 4,1mm of the casted pin-hole to remove some stain and roughness.
Do not hesitate to ask me any question You may have and send me an email and I return You some pictures asap.

Email me to: op@piekenbrink.de


With kind regards, Olaf