Mid Tiger Wheel Spacers
-
Mark Russell
- Posts: 205
- Joined: Fri Jul 17, 2009 1:22 pm
- Location: Worcestershire
- Has liked: 4 times
- Been liked: 246 times
Mid Tiger Wheel Spacers
Hi..I am currently rebuilding a mid Tiger..Is it necessary to machine the wheel spacers to reduce their diametre and give more clearance between the spacers and tyres?..thanx..Mark
-
Allan Richards
- Posts: 743
- Joined: Thu Jul 12, 2007 10:34 am
- Location: Kent
- Been liked: 10 times
Mark,
The mid Tiger 1 did have a problem with the wheel spacers hitting the tyres of adjacent wheels and it is possible to reduce the diameter to cure this problem. If you have a lathe and can do some machining I would recommend tying the wheels together on their axles so that you don't get the problem with the wheels spinning backwards when traversing lumpy ground.
The mid Tiger 1 did have a problem with the wheel spacers hitting the tyres of adjacent wheels and it is possible to reduce the diameter to cure this problem. If you have a lathe and can do some machining I would recommend tying the wheels together on their axles so that you don't get the problem with the wheels spinning backwards when traversing lumpy ground.
Allan Richards