Mid Tiger Torsion Bars

Mark Russell · Post by **Mark Russell** » Sun Aug 02, 2009 8:02 pm

Hi..I have an early Armortek mid Tiger..Can someone please confim looking at the tank from the front which size of torsion bars should be used?

ie 5mm, 5mm, 4mm etc etc

I think that mine have been assemled in the wrong sequence?

Thanks,

Mark

Adrian Harris · Post by **Adrian Harris** » Sun Aug 02, 2009 9:01 pm

I have the Early tiger (ie the one after the Mid) and the sequence in the manual is four 5mm bars, eight 4mm bars, four 5mm bars.

I'm sure one of the Mid Tiger owners will be along soon to confirm the sequence for that particular model.

Adrian.

Mick Regan · Post by **Mick Regan** » Sun Aug 02, 2009 9:03 pm

Hi Mark

Your Tigers suspension bars should be front 2 at 5mm, next 4 at 4mm, and last 2 at 5mm, for each side. The thicker rods are to take the weight of the motors and batteries.

Hope this helps

Mick