Armortek

For those of you that dont get the newsletter, here is a link to it:
Armortek - Jagdpanther announcement

The contents are also below, albeit in a less attractive format.

It's official - announcing our latest kit
We are very pleased to announce that our next kit will be an iconic tank destroyer from the World War 2 era - The Jagdpanther (or "Hunting Panther") Sd.Kfz. 173.


THE ARMORTEK JAGDPANTHER


We will be making the JAGDPANTHER AUSF. G2 which was manufactured around February/March 1945.

The G1 variant was the first to be produced starting in early 1944 and was based on the Panther chassis. The G2 variant came later in the production run, reflecting ongoing design adjustments and improvements based on battlefield experiences and production requirements. Specific visual clues between the two variants are:


SINGLE DRIVERS PERISCOPE
On the front glacis plate of the G2 there is only one drivers periscope as opposed to two on the early G1 Jagdpanther.
REAR DECK
The G1 variant used the Panther A rear deck whereas the G2 variant used the Panther G rear deck which, along with having a different layout and bolt pattern was slightly longer.
SCHUTZKAPPE - ARMOURED TOWER
Introduced in October 1944, the raised armoured tower over the left hand engine colling exhaust fan allowed for a crew compartment heating system (Kampfraumheizung).
FLAMMENVERNICHTER - FLAME MUFFLER
Flame suppression mufflers were introduced to eliminate glowing exhaust pipes and hide give-away flames from misfiring engines.
Relocation of the tools
To prevent the tools getting lost and damaged, on the G2 variant they were relocated from the hull sides to the rear of the tank.
It should be noted that even within the G2 variant of the Jagdpanther, the tank evolved with experience and with the availability of parts in a supply chain constrained environment..

Photos above were taken of the Weald Collection Jagdpanther G2 by John Griffin: John Griffin's Photos (primeportal.net)



ARMORTEK'S BEST JAGDPANTHER EVER

Armortek fans will note that we have made the Jagdpanther twice before - once in 2009 and again in 2011 (as part of the Panther uni-hull series).

Our 2024 version will bring several improvements over the previous versions with over 80% of the parts being redesigned.

Key design improvements as featured on our last Panther G are:

• More accurate pressed steel wheels

• More detailed sprockets

• More detailed front mudguards

• More detailed and welded rear bins

• More detailed rear deck

• More detailed roof vent and close defence weapon.

In addition, Jagdpanther specific improvements will be:

• More detailed crew heater

• Flame suppression exhaust system

• Relocation of the tools

And finally, on the option packs we will have:

• The new Armortek belt drive system that uses brushless motors and Kevlar reinforced belts.

• A reworked gun elevation and slew mechanism

• A proportional sound system

• A proportional engine exhaust system

• A reworked gun recoil system

• A light pack for the front light and a machine gun animation pack

PRICING AND AVAILABILITY

We expect the kit to start shipping around the middle of Summer 2024.

The launch price for the Jagdpanther is shown in the below.

United Kingdom £5,274 (INCL vat)
Rest of the World £4,395


Shipping costs will be similar to those of the Tiger 1.

COUNTRY/ REGION SHIPPING COST
United Kingdom £150+vat
Austria, Belgium, Czech Republic, Denmark, France, Germany, Ireland, Italy, the Netherlands, Northern Ireland, Spain, Sweden £225
Channel Islands, Norway, Switzerland £285
Canada, USA £595
Australia, Hong Kong, Japan £880*
New Zealand £880*
*NOTE: We are currently working to reduce the cost of shipping to the Far East and Australasia - contact us if you want to know more.

To order your kit, contact us at sales@armortek.co.uk

Armortek Kits are Limited Edition and are only available whilst stocks last.

All sales are subject to our terms and conditions which can be found here: ARMORTEK TERMS OF SALE

Excellent! Can we order flammenvernichter and schutzkappe to post date the Panther?

Brian Ostlind wrote: ↑

Mon Feb 19, 2024 6:49 pm

Excellent! Can we order flammenvernichter and schutzkappe to post date the Panther?

Yes and thanks for your email Brian.

Will be a couple of days before we can respond to everyone.

Excellent news, folks! One of the most attractive WW2 vehicles in my opinion. I should have waited until this model became available again - instead, I went down the road of creating a "new kit" using Armortek supplied spares and parts gleaned from fellow Forum members. If you haven't already seen my build log it's available in 8 parts under the Jagdpanther section.

Nice to see that the new model is being based on The Weald Foundation's vehicle. I was involved in this tank's restoration back in the day and if you'd like to see my personal photos of the project, then check out parts 5 & 6 of my New Build log.

Well done Kian and Monique - I know you've just made many people's year!

All the best from a currently gale lashed Normandy.

Re-design work almost completed. Compared with previous versions almost no parts remaining unchanged.

Looks good.

Will the crew heater also be Available to order as well as the later exhausts?
Considering building a late version panther g

Hi all
Gary , I suggest you talk to AT directly, as I have, with an expression of interest, regarding Panther parts.

Cheers

Charles

Hi Kian
Any chance of some pictures of the production parts please .

Regards Derek

Good afternoon all,

We have been busy beavering away to bring the JagdPanther to full production.
Here is a selection of photos taken on the shop floor this week.

Enjoy!

Looking good.

Would now be a good time to put forward requests for parts to upgrade our Panthers ?

Cheers

Charles

Hi Sean
Thanks for the pictures .
Getting excited to receive mine wanted one for years.

Regards Derek

Charles A Stewart wrote: ↑

Wed May 01, 2024 4:37 pm

Looking good.

Would now be a good time to put forward requests for parts to upgrade our Panthers ?

Cheers

Charles

Hi,

I asked about this a couple of weeks ago and Kian confirmed that the compartment heater, muffled exhausts and large idler wheel will all be available to order once the production run is complete.

Cheers

Sean

Looking good, can't wait for the boxes to arrive at my place.

Hello

This week, we have been having lots of fun with the upper hull side plates.
This is the final set up, with a fixture plate located over two tilting angle plates, and the part pinned for correct alignment
Hope you all have a great weekend