https://tiger1.info/EN/First-turret-fan.html
And decided to make a CAD drawing also to have both.
Turret Ventilator
-
Vince Cutajar
- Posts: 2152
- Joined: Wed Nov 15, 2017 1:43 pm
- Location: Malta
- Has liked: 719 times
- Been liked: 1708 times
Turret Ventilator
When I was doing my own late Tiger 1 I made a 3d model of the thing so that I could scratch build one myself. I couldn't find any dimensions for this late version so most were eyeballed from photos and the Armortek ventilator that came with the kit. Infact during the actual machining of the part I changed again some dimensions to make them more pleasing to the eye.
Today I came across the dimensions for the earlier model.
https://tiger1.info/EN/First-turret-fan.html
And decided to make a CAD drawing also to have both.
Vince
Today I came across the dimensions for the earlier model.
https://tiger1.info/EN/First-turret-fan.html
And decided to make a CAD drawing also to have both.
Vince
-
Tim Carr
- Posts: 171
- Joined: Sat Jun 08, 2019 4:43 am
- Has liked: 1507 times
- Been liked: 89 times
Re: Turret Ventilator
Vince
That is an outstanding website link.
Thanks for sharing it.
And Good Luck with the ventilators
Later Tim
That is an outstanding website link.
Thanks for sharing it.
And Good Luck with the ventilators
Later Tim
Tampa Bay, Fla area USA.