1950 Series 1 80" - Pre Order now open
Posted: Tue Feb 14, 2023 10:21 pm
Today the design for the Series 1 was frozen and prototyping has started.
Pre-orders for the Armortek 1:6 scale 1950 Series 1 car have now opened. To order, either visit this page (www.armortek.co.uk/series-1-car/) or send us an email at sales@armortek.co.uk
The kit is priced at £1,650 plus VAT (where applicable) and shipping.
Key features of the Armortek 1950 Series 1 80″ car are:
– Leaf spring suspension
– Pressed steel wheels with detailed moulded T28 rubber tyres.
– Functional folding windscreen
– Functional folding rear tail gate
– Fully removable doors – which can also be split by removing the top half
– Cloth roof covering
The remote control motion option will add 4 wheel drive through 2 differentials.
The sound option will add real life sounds to the model – recorded off a 1950’s Series 1.
As we progress through the detailed design and prototyping some details may change.
Length: 56cm (22″)
Width: 26cm (10″)
Height:32cm (13″)
Weight – to be determined – approximately 12kg
Number of parts = approx 260 (with 140 unique components)
Number of fasteners = TBA
The images below show some renders of the final model:
Pre-orders for the Armortek 1:6 scale 1950 Series 1 car have now opened. To order, either visit this page (www.armortek.co.uk/series-1-car/) or send us an email at sales@armortek.co.uk
The kit is priced at £1,650 plus VAT (where applicable) and shipping.
Key features of the Armortek 1950 Series 1 80″ car are:
– Leaf spring suspension
– Pressed steel wheels with detailed moulded T28 rubber tyres.
– Functional folding windscreen
– Functional folding rear tail gate
– Fully removable doors – which can also be split by removing the top half
– Cloth roof covering
The remote control motion option will add 4 wheel drive through 2 differentials.
The sound option will add real life sounds to the model – recorded off a 1950’s Series 1.
As we progress through the detailed design and prototyping some details may change.
Length: 56cm (22″)
Width: 26cm (10″)
Height:32cm (13″)
Weight – to be determined – approximately 12kg
Number of parts = approx 260 (with 140 unique components)
Number of fasteners = TBA
The images below show some renders of the final model:
- Front view of the complete model
- Rear view of the complete model
- Series 1 shown without the cloth roof cover
- Series 1 shown with top half of the doors removed. The doors are multi part to allow them to be split.
- Series 1 shown with no doors - the doors have been designed to be fully detachable.
- Series 1 shown with the windscreen folded down
- Rear left tyre and suspension
- Half hinge to allow the doors to be detachable
- Pressed steel wheels
- Front grill and headlights