Dont know if i take the famo, still some problems with drive and steering.
In reverse turn i donth have engough power, have to look in my transmitter setup. forward is ok.
About the steering on the weels they turn left and right if they are of the ground, but if i put the famo on the ground they donth
not so good. Maybe need some change in my transmitter or else is the steering actuator not strong enough.
I think if the famo is not ready till than, i bring my stug and 251 or my kt
Best regards Yves
Hello Yves.
That sounds somewhat with the curve of the mixer, it could be to 'flat'.
What kind of transmittrrt do you use? One with a LCD screen?
Regards,
Ed
Re: Yves sdkfz 9 update
Posted: Wed May 15, 2024 6:40 pm
by yves mouton
Hello Ed,
I use a Graupner MZ-24 hott
Best regards Yves
Re: Yves sdkfz 9 update
Posted: Mon May 20, 2024 7:43 pm
by yves mouton
Hello,
I have a question for the famo drivers.
Did you use 1 stick to drive the tracks and wheels together or do you use a stick for the tracks and a stick for the wheels?
I did a test drive and sometimes the left track blocks and the right track drives when a try to drive straight ahead.
I drive 1 stick for the tracks and 1 for the wheels, the stick for the tracks responds very sensitve.
Best regards Yves
Re: Yves sdkfz 9 update
Posted: Sun Aug 11, 2024 7:46 pm
by yves mouton
Hello,
A Famo video,
Best regards Yves
Re: Yves sdkfz 9 update
Posted: Sun Aug 25, 2024 11:20 am
by yves mouton
Hello,
Today was a nice day to bring out my Armortek models.
Best regards Yves
Re: Yves sdkfz 9 update
Posted: Sun Aug 25, 2024 12:34 pm
by Steve Norris
Hi Yves
Very nice Armortek line up
Regards
Steve
Re: Yves sdkfz 9 update
Posted: Sun Aug 25, 2024 11:10 pm
by simon_manning
Well done Yves, i can Remember them all, A good collection over a few years now, regards simon.
Re: Yves sdkfz 9 update
Posted: Mon Aug 26, 2024 10:23 am
by yves mouton
Thanks for the nice comments
Next project will be the jagdpanther.
