Armortek

Hi,
I bought a partially built jagdtiger of Ebay a few months back. Since owning this model I have added the motion packs with the exception of the elevation and made various tweaks.

Model has been built to a good standard. I have added some cast texture and parts from the main man Steve Winstone.

More progress

Hi,

This picture shows Steve Winstone C shackles and brackets fitted. Tow hitch and armoured exhaust guards have been printed by previous owner.

Hello David,

Another superb Model you have built.
From the 1st photo there are nice door locking mechanisms of the casemate. Are they self-made or from Steve Winston / Sascha Hornbach ?
Any more details photo ?

Cheers,
Lerh Chang

Hi Chang
The rear doors had been completed by the previous owner. unfortunately these were a printed part so the likelyhood of me breaking these was high. Now for the good news! Steve Winstone is currently making these from steel.

David Brady wrote: ↑

Thu Sep 01, 2022 11:14 am

Hi Chang
The rear doors had been completed by the previous owner. unfortunately these were a printed part so the likelyhood of me breaking these was high. Now for the good news! Steve Winstone is currently making these from steel.

I’d be interested in this, and also the aerial mount above the casement doors, I intend to make in the future unless someone can print one for me.

Hi All,

A few pictures of Steve Winstone Jagdtiger rear door detail made from steel. Steve will need your rear doors to complete this work. I suggest anyone with a Jagdtiger reach out and book them in.

Rubber seal fitted by me with retaining pins to complete.

DB

Very nice Ebay find! Will be awesome model once finished. Good to hear Steve is making stuff once again?
Best regards,
Bob

Robert E Morey wrote: ↑

Fri Sep 30, 2022 5:19 pm

Very nice Ebay find! Will be awesome model once finished. Good to hear Steve is making stuff once again?
Best regards,
Bob

Is Steve W back in business?
How cav I contact him?
I lost my adress book.

Robert

Hi,

Steve can be contacted on the below.

steve.winstone@sky.com

All best,

DB

Hi,

Looking at my King tiger for reference
... this is one mean looking tank.

DB

Hi,

Steve Winstone Jack and brackets fitted, original holes blanked off and mounting repositioned as pictured.

DB

Hi All

Time for some gun cleaning rods and tow cable brackets from my favourite parts supplier Steve Winstone. Original kit position altered.


DB

Coming Together Dave, yes steve's parts are the added luxury to these vehicles, keep going, don't stop, regards simon.

Thanks Simon

One last cable holder to go then onto moving the track hangers

Cheers