The Official Armortek Forum - World leader in one sixth scale metal kits

Hello,

Finally i found a unbuilt a sdkfz 251
Best regards Yves

Yves.
Well done, I know where that one came from, rare model to find especially unbuilt.
Regards
Steve

Hi Steve,

It will take a some time before i got it, have to come to the uk ( tankfest or maybe sooner )
I have to find out the covit rules to take the boat or train in France.

Also have to find out the electronics i need from Armortek to put in the sdkfz 251.
Hopfully i they can help me with the sdkfz soundcard and speaker that fit.

Best regards Yves

Hi Yves,
I picked up a unbuilt M2/M3/M16 kit from the same man on Friday and will have to contact Armortek for the option packs like you.
Hopefully this won’t be an issue.
Regards
Steve

Hello,

I know what i gonna do with the sdkfz 251,
i am gonna ( if i can find one hopefully ) put a pak 40 on the 251

Maybe someone can help me find a unbuilt pak 40

Best regards Yves

Hello,

Back from tankfest with the sdkfz 251




best regards Yves

Hello Yves,

congrats and a lot of fun building it up.

Any chance for your help to re-build some missing front section sheet metal parts for my 251 Prototype ??
I got some sheetmetal Parts from Bodo allready some years ago now but some of the lower key parts are missing..
Armortek has no spares on that so to "copy" some untouched would be so great

Just taking some measurements would be of a big help allready

cheers,

Uwe

Hello Uwe,

Let me know what part nr are missing and i will take measurements from my parts.
best regards Yves

Hello,

Started on the tracklinks today.



Best regards Yves

Hello Yves,

thanks a lot for your offer to help !

Part numbers I'm after are:
1.) CM0341 - front floor
2.) CM0342 & CM0342M - bulkhead
3.) CM0307 & CM0307M - front side ( one side would be fine )
4.) CM0314 & CM0314M - engine bay 8 one side would be fine )

I'll send you a PM as well to align on your work with that

Thanks allready and cheers from Cologne,

Uwe

Hello Uwe,

I will look tomorrow in my part list.

Today did some more work on the 251.




I drill ha hole on both sides of the suspension arms and put a split pen in.





Clean up the wheels with a dremel.



Best regards Yves

Hello,

Today i did some paint work and made a bottom floorplate.










Also made a part of the front suspension



Best regards Yves

Hello Yves,

wow you're fast and I'm looking forward to the progress of your model.
Thanks for your great support on my missing parts so I can have now also a start on my "Prototype chassis only".

cheers from Cologne,

Uwe

Hello,

Thanks for the nice comments Uwe.
I help people where i can, i got also a lot of help from other forum members.

Best regards Yves

Hello,

Made some progress on the 251.
Today i put the front wheels - the sprockets and the torsionbars on the swingarms.
I flatten the grub screws so i can take out the swingarms ( for easy maintenance ) just take out the M5 bolts





Swingarms are now ready to put primer on

Best regards Yves