Tiger 1 , PzIII and Panther new parts

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

I am turning my attention back to individual parts for a little while and the first part we are doing is the Tiger 1 starting handle. I have been asked about the Tiger 1 escape hatch more times than I can remember so that will probably be next.

Are there any particular Tiger parts people would like to see available? No promises but we will consider suggestions.

Best regards

Dave
Attachments
20211031_121222.jpg
20211031_121150.jpg
Last edited by Dave Dibb (Armorpax) on Sat Nov 20, 2021 2:41 pm, edited 2 times in total.
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

User avatar
Adrian Harris
Posts: 5133
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 1486 times
Been liked: 1695 times

Re: Tiger 1 parts

Post by Adrian Harris »

Front and rear mudguard sets, plus the photo-etched engine grill covers.

Mudguards get bashed around if you use the tanks, so it would be handy to have a local supply to replace them.

Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module

User avatar
Robert E Morey
Posts: 2352
Joined: Wed Jul 18, 2007 12:59 am
Location: Seattle, WA USA
Has liked: 161 times
Been liked: 845 times

Re: Tiger 1 parts

Post by Robert E Morey »

Hi Dave
This is good news. Is the crank turned ally or white metal? I love your clamp kits. For Tiger parts I know the loader hatch is one (late vs early) and also the rear bin. Mike S kit bin is nice - but a daunting kit. It would be nice for an interim solution (ie better than kit bin, but perhaps not $500 kit from "vendor to not be named"). Even an upgrade kit to the kit supplied bin would welcome. Its a rather large undertaking.

For Panther parts - it would be nice to have a photo etch sheet of the chain wrap on the gun travel lock. I can make everything else, but the tiny links are pain to machine. I've tried to get the complete travel lock from Steve W but no luck yet.

Best regards,

Bob

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 parts

Post by Dave Dibb (Armorpax) »

Hi Robert/Adrian,

These are the masters, handle parts will be White metal cast once moulds are done. I do both the late and 40mm loaders hatch already so may take a look at the early hatch.

Not sure on the PE bits for now as already have a backlog of stuff like the stencils waiting for Phototools but will keep them in mind for the future. I'll need to get a look at the bin and see what we can do but thinking of smaller easy win stuff to start with.

Cheers

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 and other new parts

Post by Dave Dibb (Armorpax) »

Hi All,

1/6th Panzer III starting handle. Will be available soon along with the Tiger 1 starting handle. More to come.

Best regards,

Dave
Attachments
20211114_105549.jpg
20211114_105555.jpg
20211114_105602.jpg
20181206_204419-1000x1000.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1, PIII, and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

I have added the Panther Track tensioner and Panther Starting handle to the parts going on the new mould. I haven't yet fixed the aluminium ends to the brass centre on the Panther starter as although scaled from pics and drawings I could really do with the centre to centre dimension shown in the pic to ensure it will fit the Armortek frames. If anyone can provide this it would be much appreciated.

Best regards

Dave
Attachments
20211119_234655.jpg
20211119_234704.jpg
20211119_234707.jpg
20211119_234717.jpg
20211119_235543.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 and other new parts

Post by Dave Dibb (Armorpax) »

Hi All,

In addition can anyone provide the footprint of the Jack block that goes on the Panther side frame?

Best regards

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

First of our new German tank tools now moulded and ready to start production. Prices and details will be added to the website later this week time permitting. Panther starter has been done to suit the Armortek rack.

Kian has kindly loaned me a Tiger Turret bin so going to have a look at how we could do an add on kit for it. More Tiger parts to come in 2022.

We will be closing for at least 3 weeks at Christmas and w/c 13th December will be our last production week before the New Year.

Best regards

Dave
Attachments
20211128_130356.jpg
20211128_130051.jpg
20211128_130134.jpg
20211128_130153.jpg
20211128_130242.jpg
20211128_130319.jpg
20211128_130343.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

New parts now available to order. Prices exclude p&p and will update the website when I get chance. May be once we break for Christmas though as not having much spare time.

AP332-GR PANZER III STARTING HANDLE AND CLAMPS £16.50
AP333-GR TIGER 1 STARTING HANDLE SET WITH CLAMPS £22.00
AP334-GR PANTHER STARTING HANDLE WITH CLAMPS £16.50
AP335-GR PANTHER IDLER ADJUSTER WITH CLAMPS £16.50

Tiger 1 starting handle makes either option.

Best regards,

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Björn Johansson
Posts: 166
Joined: Wed Mar 31, 2021 4:50 pm
Location: Falsterbo
Has liked: 481 times
Been liked: 408 times

Re: Tiger 1 , PzIII and Panther new parts

Post by Björn Johansson »

Ahhh this I totaly missed :cry:
Got to have one for my Stug :wink: just to see how far off I am on my own one :wink:
Send you a note Dave
Kind regards from Björn

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

Happy New Year to you all. I'm on a bit of a master making roll at the moment so using some of my time off to beef up our offerings.

Latest creations are the tool box for the front mudguard on the PIII, Rear engine cover hinges for the PIII and Stug III (Werkstatt 5 already do the larger front access cover ones.) and Tiger 1 Turret bin catches. I am working on the cleaning rod brackets for the PIII and also the Track tool box found on the PIII, Stug and Tiger 1. This tool box may need a scale and semi scale version as we don't have the gap we need between the rear vents on the Stug.

We are also in discussion with Werkstatt 5 on some collaborative items and we will give more details once we have finalised plans. Marks excellent brass castings of our Tiger 1 front hatch hinges will be standard now on all future sets and when I get them done we will be have part metal part clear resin periscopes.

Metal and brass prices have continued to climb and our metal cost are now up by over 40%. We are going to have start applying some of this increase to our prices and I will be updating our price list over the next few weeks. To be fair we don't increase our prices often and its only due to material costs we are having to do it now. Resin at present is unaffected so it will not be right across the board.

Best regards

Dave
Attachments
20211230_173008.jpg
20211230_173022.jpg
20211230_173028.jpg
20211230_173036.jpg
20220101_215009.jpg
20220101_215051.jpg
20220101_215223.jpg
20220101_215236.jpg
20220102_135045.jpg
20220102_135033.jpg
20220102_133526.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

Track Tool Box for the Panzer III and Stug III.

Best regards

Dave
Attachments
20220103_123551.jpg
20220103_123444.jpg
20220103_124745.jpg
20220103_124754.jpg
20220103_124803.jpg
20220103_124808.jpg
20220103_124818.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

I have started modifying the Tiger Periscope to finish the update to the Tiger Driver and Radio Operator hatches. I still have to recess the mounting indicated by the black rectangle but once done we will make a new mould along with some of the other recent parts. The plan is to then cast the top and bottom part of the periscope in clear resin. The new sets will have the Werkstatt 5 brass hinges as standard too.

Best regards,

Dave
Attachments
20220105_204638.jpg
20220105_204652.jpg
20220105_204806.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

Late war long prybar. This will also be moulded and added to the range in the coming weeks.

Best regards

Dave
Attachments
20220107_171409.jpg
20220107_173427.jpg
20220107_173446.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:

Re: Tiger 1 , PzIII and Panther new parts

Post by Dave Dibb (Armorpax) »

Hi All,

Most of the new parts are now moulded and ready to cast. We will price and add to the range later this week.

Best regards

Dave
Attachments
20220116_142325.jpg
20220116_142333.jpg
20220116_142347.jpg
20220116_142408.jpg
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................

Post Reply