Panther, Jagdpanther and King tiger Fan Guards
Posted: Sat Sep 20, 2008 10:56 pm
Hi Everyone
I have decided to offer these for those interested in upgrading the intake and exhaust guards on the Panther and Jagdpanther models. The same exhaust fan guard was also used on the King Tiger. These were made from the masters I made and used on my own Panther. They are cast using a high-quality, tough cast urethane and NOT metal.
Exhaust Fan Guard
The hole pattern is slightly different then the kits so some simple drilling is required. The Armotek kit's fasteners are used for mounting them to the deck and the top diameter is very close to the Armortek ones so the kit's mesh covers could be used as well as Mike Stannard's excellent ones.
Price for a set of two is $55.00 plus shipping
Intake and Exhaust Fan Guard as a Set
The intake guards I designed and made are only usable with deck modification as seen here. http://www.armortek.co.uk/forum/viewtopic.php?t=657
They will NOT work in the kit's existing opening. Also, the Armortek mesh covers will not work with these due to the change in length. I highly recommend Mike Stannard's mesh covers as a kit and they can be built to fit with some soldering. Fasteners for the mesh covers are included.
Price for a set of four intake guards and two exhaust fan guards is $95.00 plus shipping.
Here are some photos of the parts installed.
Please send a PM or email if you would like to order the parts or with any questions.
Thanks
Tim[/b]
I have decided to offer these for those interested in upgrading the intake and exhaust guards on the Panther and Jagdpanther models. The same exhaust fan guard was also used on the King Tiger. These were made from the masters I made and used on my own Panther. They are cast using a high-quality, tough cast urethane and NOT metal.
Exhaust Fan Guard
The hole pattern is slightly different then the kits so some simple drilling is required. The Armotek kit's fasteners are used for mounting them to the deck and the top diameter is very close to the Armortek ones so the kit's mesh covers could be used as well as Mike Stannard's excellent ones.
Price for a set of two is $55.00 plus shipping
Intake and Exhaust Fan Guard as a Set
The intake guards I designed and made are only usable with deck modification as seen here. http://www.armortek.co.uk/forum/viewtopic.php?t=657
They will NOT work in the kit's existing opening. Also, the Armortek mesh covers will not work with these due to the change in length. I highly recommend Mike Stannard's mesh covers as a kit and they can be built to fit with some soldering. Fasteners for the mesh covers are included.
Price for a set of four intake guards and two exhaust fan guards is $95.00 plus shipping.
Here are some photos of the parts installed.
Please send a PM or email if you would like to order the parts or with any questions.
Thanks
Tim[/b]