Page 1 of 2
3d printed 88mm gun rifling
Posted: Sun Dec 01, 2019 1:33 pm
by Steen Vøler
Hi all
Just finished my 3d printed 88mm tiger 1 turret gun interior and of the parts not used I sanded down one part to simulate the rifling at he end of the gun near the muzzle brake
Just need the final sanding to fit and then glue into place
Re: 3d printed 88mm gun rifling
Posted: Sun Dec 01, 2019 4:25 pm
by mark lawson
Exceptional work Stean, have you printed this yourself.
Re: 3d printed 88mm gun rifling
Posted: Sun Dec 01, 2019 6:50 pm
by Steen Vøler
Hi Mark
Yes - printed on my new Ender 3Pro - total print time took 65 hours. Its cut up into 4 major parts and assambled with a glue that melts parts together so its very very stable in the construction
Re: 3d printed 88mm gun rifling
Posted: Sun Dec 01, 2019 6:53 pm
by Steen Vøler
the last part was finished tonight and it not glued to the main part, but it shows the length of the unit - its really huge
Re: 3d printed 88mm gun rifling
Posted: Sun Dec 01, 2019 8:59 pm
by mark lawson
I can see other being interested in this part have you thought of offering it for sale.
Re: 3d printed 88mm gun rifling
Posted: Mon Dec 02, 2019 6:45 am
by Michael Röder
Hello Steen!
Great Work! The part also has a good print quality.
Did you construct the part yourself?
Regards Michael
Re: 3d printed 88mm gun rifling
Posted: Mon Dec 02, 2019 4:35 pm
by Fabian Bekkers
Looks super Steen
Re: 3d printed 88mm gun rifling
Posted: Mon Dec 02, 2019 10:36 pm
by Robert Tanzer
A great job you did Steen
Re: 3d printed 88mm gun rifling
Posted: Tue Dec 03, 2019 8:25 pm
by Steen Vøler
@Michael
I bought the CAD design as a whole gun unit including mantlet. This was then cut up as I do not need the 88mm outer part, but only the internal parts
@Robert
Thanks
@Mark
Maybe the 88mm rifle plug - I am designing a rifleplug that fits directly into the barrel. The diameter is very close to 1.4cm om my armortek tiger 1 barrel, so will make it 1.4mm and then a little bit of sanding to make it fit if the barrel productions from the variuos production years if there are tolerence differences.
This part would cost about 6 pound incl filament, power and printer usage.
Re: 3d printed 88mm gun rifling
Posted: Tue Dec 03, 2019 11:42 pm
by Marco Peter
Steen Vøler wrote:
This part would cost about 6 pound incl filament, power and printer usage.
Very nice, I would love one!
Re: 3d printed 88mm gun rifling
Posted: Wed Dec 04, 2019 8:06 am
by Steen Vøler
88mm gun rifling is now for sale
Price is 6 pound per piece + bubble plast envelope + posting to actual cost.
Payment via PayPal only
PM me with amount you want + shipping adress and I will calculate shipping cost
Price example to Netherlands would be 6 pound+ 1.5 pound for bubble envelope + 3.5 pound for shipping = 11 pound
Re: 3d printed 88mm gun rifling
Posted: Wed Dec 04, 2019 9:13 am
by Marco Peter
Lovely, I'll PM you!
Re: 3d printed 88mm gun rifling
Posted: Thu Dec 05, 2019 8:15 pm
by Steen Vøler
Before and after
Re: 3d printed 88mm gun rifling
Posted: Tue Dec 10, 2019 7:44 pm
by John Fitzsimons
Great part Steen. I do not know much about 3d printing. Where do you buy the cad designs? Do they come in 1/6?
John
Re: 3d printed 88mm gun rifling
Posted: Wed Dec 11, 2019 1:22 am
by Robert Reid
Hummmmmm.... do those come in 17 pdr and Pak 43?
Probably too late for my 25 pdr... Very, very cool accessory!
Cheers,
RPR
