Hello All,
my Recoil Module is not working.
When is switch on the tank, the Servo is moving for a step and when I switch off the tank, the Servo is moving for a step again, that's all.
When i give a command to channel #6, I hear a relay switching and it gives power to the plug with the yellow and white wire, what is directed in the turret but has no description in the manual. I think this is for the blank-fire-unit ( I have not). I checked this with a lamp that is going on and off.
The LED-loom is all time off, nothing happens with it.
Also I hear no sound of gunfire or MG-gunfire. Drive sound of the motors is very well.
There are only 3 wires from the Recoil Module to connect, like Recoil-Module-Manual.
The left with the black plug, runs to the receiver.
The middle with a white plug, runs to the Amplifier-Module to E ( ex amplifier control cable)
The right with a white plug, (it has got only the green wire connected, blue and red are cut off), runs to the Amplifier-Module to F ( m/c gun flasher output)
Turret rotation and gun elevation with limit-switches is working.
Next Point:
What is the "Third switched channel connection" ?
I bought the complete Option-pack, but what is this, have i to buy something more ?
Thank you for your help in advance.
Recoil Module is not working
-
- Posts: 22
- Joined: Sun Sep 18, 2011 4:34 pm
- Location: near Cologne / Köln
- Been liked: 6 times
-
- Posts: 22
- Joined: Sun Sep 18, 2011 4:34 pm
- Location: near Cologne / Köln
- Been liked: 6 times
Re: Recoil Module is not working
Hello,
it was good to meet armortekowners at SantaFe-Event - problem is solved now.
Thank's
it was good to meet armortekowners at SantaFe-Event - problem is solved now.
Thank's
The difference between man and boy's, is the price of the toy's.