Armortek

Posted: **Mon Sep 26, 2016 9:16 pm**

hello how long the GUN Pipe from the Panzer IV in 1/6

Posted: **Tue Sep 27, 2016 7:43 pm**

Help me
which is really bad in this forum. all read only but no one writes

Posted: **Tue Sep 27, 2016 8:40 pm**

Hello Heiko,

I'm sure the ones with Panzer 4 are looking and will reply once the detail has been clarified

I don't have that model, but what I can offer is to have a look at the Bovington Tank Museum.
I'll be there for TankMod 2016 on Oct.08 and if they have one, I'll figure out for you !

cheers from Cologne,

Uwe

Posted: **Tue Sep 27, 2016 10:49 pm**

According to the plans for the original Armortek Panzer IV, the overall length of the barrel, part number CD0429, should be 388mm.
The cylindrical section which fits into the gun tube at the turret end is 100mm long and 25mm in diameter. The tapered section from the gun tube to the muzzle brake is 288mm long.

The muzzle brake, part number CD0430, is 67mm from end to end.

The two together would be 288mm + 67mm, so 355mm in total.

Adrian.

Armortek

long the GUN Pipe from the Panzer IV in 1/6

long the GUN Pipe from the Panzer IV in 1/6

Re: long the GUN Pipe from the Panzer IV in 1/6

Re: long the GUN Pipe from the Panzer IV in 1/6

Re: long the GUN Pipe from the Panzer IV in 1/6