The Official Armortek Forum - World leader in one sixth scale metal kits

Hi Guys
I have just unpacked my Option Pack 1 and sound unit
and I think I may need some advice the sound unit has 3 identical
leads with recever type plugs on and I cant see what goes where?
In fairness I have only had a quick look and not spent much time yet
but is there any clues?
There used to be some photos of OP1 and 2 buy they were very small and I cant find them.

I hope someone knows

Regards

Derek

Hi Derek

Once you get everything laid out it becomes pretty straight forward. Just cross-check the images in the manual(assuming they are the same as I had for the Panther) and the schematic. Of course I may not be the best to give out advice as my MG sound still doesn't work.


Are these the pictures you are thinking of?





Good luck


Tim

Hello Derek

The Rc leads from the black plug with 4 leads in. The top is the power next down is the input for ESP 1 the next one down is the input for ESP 2 and the bottom lead is the input from the Reciever.To get the full manual it can be downloaded from www.benedini.de

lee

Hi Tim and Lee
Tim wireing for the Panther is what I am doing I am getting there
slowly the pictures are what I was looking for.
Its a shame they are not bigger!!!

(Mark could somthing be done there)

Lee I have desided to get things running then add the sound unit later.

Thanks for the help guys

Derek

Try pressing ALT AND PRINT SCREEN when you are looking at the picture.
Open a photo editor program.
Open a NEW FILE
Under EDIT click PASTE
You can now zoom in, and change picture as you want and save it and print it if required.

Hi Greaham
thanks for that tip Its a big help.

Derek