SOLD - For Sale Tiger 1 (Late Prod) kit & Extras
Posted: Sat Jun 14, 2014 10:57 am
Hi Guys,
It is with a heavy heart that I must sell my Late Production Tiger 1 kit.
The hull (shell only) has been built and I super detailed the axle hubs to the point of making grease nipples. The hull, top deck, wheels, drive sprockets and idler wheels along with the rear deck covers have been sprayed with primer. The Kit comes with all the Armortek option packs as listed (no recoil pack). The sale also includes a ridicules amount of accessories from all those wonderful people that make this hobby so interesting, namely Mike Stannard, Tim Casson and Steve Winstone.
Here is a list of most parts, there are others which I have yet to find in my well overstocked garage.
Armortek Tiger 1 Ausf E Late Production Kit (2007 Production) (Hull built)
Option Pack 1 Motors/Gearbox/Electronics
Option Pack 2 Smoke Generator/ Benedini Sound Unit/12 Guage Blank Firer
Extras:
TT32a Turret Stowage Bin (Fully Assembled) by Mike Stannard
TT23 Front Mudguards (Fully Assembled) by Mike Stannard
TT25 Rear Mudguards (Fully Assembled) by Mike Stannard
TT37K Tiger 1 Late Cupola Kit by Mike Stannard
TT18b Tiger 1 Sternantenne D Deluxe Set (for Command tank) by Mike Stannard
Gent008a 1.4m Stab Antenna with Strap & wing nut by Mike Stannard
Gent008b 2m Stab Antenna with Strap & wing nut by Mike Stannard
Gent007b x2 Antennenfuss (flexible base) for Gent008a & Gent008b by Mike Stannard
TT16a Escape Hatch by Mike Stannard
TT04-02K Jack Bock Set by Mike Stannard
TT22 Turret Air Vent by Mike Stannard
TT04-03 Starter Crank Set with Clamps by Mike Stannard
TT11K MG AA Cupola Mount by Mike Stannard
TT01-05ma Tiger 1 Pry Bar by Mike Stannard
Gent025A Cleaning Rod Set with machined Brass Ends & Cast Clamps by Mike Stannard
Gent020 x2 Padlocks (kit) for Turret Stowage Bin by Mike Stannard
TT12-UP01K Track Tow Rope with Brass Clamp Fittings by Mike Stannard
TT03 Tow Ropes with Cast Clamps by Mike Stannard
Various sets of Clamps both Brass Etch & Cast for all tools etc by Mike Stannard
25t Jack by Steve Winstone
Working Bosch Headlight c/w mounting bracket, conduit and junction box by Steve Winstone
Hull MG with working LED (high quality)...can't remember who made it...doh!!!
Rear Starter Plate (Super detailed) by Steve Winstone
Rear exhaust guards by Steve Winstone
Working Rear convoy light by Steve Winstone
1 set of 'C' Shackles c/w Clamps by Steve Winstone
1 set of 'D' Shackles c/w Clamps by Steve Winstone
Driver & Radio Opp Hatches c/w periscopes(all cast white metal) by Armorpax
Ariel Deck Storage Tube (working hinged door cover)...Again can't remember....oh dear!
There are a few other parts from Mike Stannard & Armorpax to add to this list and I'll update as & when I find them.
As you can see, this lot will make a fine detailed Command Tiger. There must be in excess of £5500 of kit so please make sensible offers.
Postage/shipping costs to be paid by the buyer.
Offers & any questions, you can email me on the following:
michael.cooper7@ntlworld.com
It is with a heavy heart that I must sell my Late Production Tiger 1 kit.
The hull (shell only) has been built and I super detailed the axle hubs to the point of making grease nipples. The hull, top deck, wheels, drive sprockets and idler wheels along with the rear deck covers have been sprayed with primer. The Kit comes with all the Armortek option packs as listed (no recoil pack). The sale also includes a ridicules amount of accessories from all those wonderful people that make this hobby so interesting, namely Mike Stannard, Tim Casson and Steve Winstone.
Here is a list of most parts, there are others which I have yet to find in my well overstocked garage.
Armortek Tiger 1 Ausf E Late Production Kit (2007 Production) (Hull built)
Option Pack 1 Motors/Gearbox/Electronics
Option Pack 2 Smoke Generator/ Benedini Sound Unit/12 Guage Blank Firer
Extras:
TT32a Turret Stowage Bin (Fully Assembled) by Mike Stannard
TT23 Front Mudguards (Fully Assembled) by Mike Stannard
TT25 Rear Mudguards (Fully Assembled) by Mike Stannard
TT37K Tiger 1 Late Cupola Kit by Mike Stannard
TT18b Tiger 1 Sternantenne D Deluxe Set (for Command tank) by Mike Stannard
Gent008a 1.4m Stab Antenna with Strap & wing nut by Mike Stannard
Gent008b 2m Stab Antenna with Strap & wing nut by Mike Stannard
Gent007b x2 Antennenfuss (flexible base) for Gent008a & Gent008b by Mike Stannard
TT16a Escape Hatch by Mike Stannard
TT04-02K Jack Bock Set by Mike Stannard
TT22 Turret Air Vent by Mike Stannard
TT04-03 Starter Crank Set with Clamps by Mike Stannard
TT11K MG AA Cupola Mount by Mike Stannard
TT01-05ma Tiger 1 Pry Bar by Mike Stannard
Gent025A Cleaning Rod Set with machined Brass Ends & Cast Clamps by Mike Stannard
Gent020 x2 Padlocks (kit) for Turret Stowage Bin by Mike Stannard
TT12-UP01K Track Tow Rope with Brass Clamp Fittings by Mike Stannard
TT03 Tow Ropes with Cast Clamps by Mike Stannard
Various sets of Clamps both Brass Etch & Cast for all tools etc by Mike Stannard
25t Jack by Steve Winstone
Working Bosch Headlight c/w mounting bracket, conduit and junction box by Steve Winstone
Hull MG with working LED (high quality)...can't remember who made it...doh!!!
Rear Starter Plate (Super detailed) by Steve Winstone
Rear exhaust guards by Steve Winstone
Working Rear convoy light by Steve Winstone
1 set of 'C' Shackles c/w Clamps by Steve Winstone
1 set of 'D' Shackles c/w Clamps by Steve Winstone
Driver & Radio Opp Hatches c/w periscopes(all cast white metal) by Armorpax
Ariel Deck Storage Tube (working hinged door cover)...Again can't remember....oh dear!
There are a few other parts from Mike Stannard & Armorpax to add to this list and I'll update as & when I find them.
As you can see, this lot will make a fine detailed Command Tiger. There must be in excess of £5500 of kit so please make sensible offers.
Postage/shipping costs to be paid by the buyer.
Offers & any questions, you can email me on the following:
michael.cooper7@ntlworld.com