Bergepanther William
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
Re: Bergepanther William
Thank you Bob and Fabrice.
Working on the aufbau the original from armotek have 4 hinged side panels in real it was only the right and left side.
Working on the aufbau the original from armotek have 4 hinged side panels in real it was only the right and left side.
With Regards William
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
Re: Bergepanther William
Hello
made a start with the steeltracks from Vincent. I would like to thanks Martin for his good drawings of the sprocket rings.
made a start with the steeltracks from Vincent. I would like to thanks Martin for his good drawings of the sprocket rings.
With Regards William
-
- Posts: 189
- Joined: Sat Aug 03, 2013 6:40 am
- Location: Germany,Hamburg
- Has liked: 5 times
- Been liked: 38 times
-
- Posts: 4217
- Joined: Mon Mar 01, 2010 4:48 pm
- Location: Cornwall
- Has liked: 2224 times
- Been liked: 6945 times
Re: Bergepanther William
Looking good William, I love all your fabrication, regards Phil
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
- Martin Hofmann
- Posts: 454
- Joined: Tue Jan 06, 2015 4:20 pm
- Location: Hamburg, Germany
- Has liked: 141 times
- Been liked: 1569 times
Re: Bergepanther William
Hi William,
thank you for the compliments for the drawings. I can see that the chamfers of the parts you have built are very small. Is there a possibility to come to the 5 mm and 15° seen on the drawing, because that is very important for finding the teeth to the track links! But all in all your Bergepanther is a very very amazing tank with so much details - i love it
PS: don't forget the distance plate of 1,5 mm between the ring and the body
thank you for the compliments for the drawings. I can see that the chamfers of the parts you have built are very small. Is there a possibility to come to the 5 mm and 15° seen on the drawing, because that is very important for finding the teeth to the track links! But all in all your Bergepanther is a very very amazing tank with so much details - i love it
PS: don't forget the distance plate of 1,5 mm between the ring and the body
Regards Martin
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
Re: Bergepanther William
Hello
thanks for the comments . Martin the distance plate is mountet the chamfers on the teeth will come wenn the tracks are mountet and i can run it.
Made a new deckplate wich has the right openings .
thanks for the comments . Martin the distance plate is mountet the chamfers on the teeth will come wenn the tracks are mountet and i can run it.
Made a new deckplate wich has the right openings .
With Regards William
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
- Gerhard Michel
- Posts: 595
- Joined: Tue Oct 04, 2016 12:27 pm
- Location: near Nuremberg, Germany
- Has liked: 3 times
- Been liked: 565 times
Re: Bergepanther William
Hi William,
nice details, indeed!
Just a question: did you already get first knowledge with the steel track links when driving?
nice details, indeed!
Just a question: did you already get first knowledge with the steel track links when driving?
kind regards
Gerhard
____________________________________________________________________
1/6 Scale models: Jagdpanther (AT), Jagdtiger (BT), Königstiger (Porsche turret, NH), Königstiger (Production turret, BT), Pz. IV (SH)
Gerhard
____________________________________________________________________
1/6 Scale models: Jagdpanther (AT), Jagdtiger (BT), Königstiger (Porsche turret, NH), Königstiger (Production turret, BT), Pz. IV (SH)
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
Re: Bergepanther William
Hello Gerard
Steeltrack is on Hold i have mounted the distance ring i have chamferd the teeth off the sprocketrings. I have put a small distance ring between de tracklinks . The eisgreifer i brought back too 3 mm . But the big problem is the Horns on the tracklinks are too soft thy bend with only a little resistance. Have too figur out if thy can be harded.
So back to the original tracklinks .
Steeltrack is on Hold i have mounted the distance ring i have chamferd the teeth off the sprocketrings. I have put a small distance ring between de tracklinks . The eisgreifer i brought back too 3 mm . But the big problem is the Horns on the tracklinks are too soft thy bend with only a little resistance. Have too figur out if thy can be harded.
So back to the original tracklinks .
With Regards William
- Gerhard Michel
- Posts: 595
- Joined: Tue Oct 04, 2016 12:27 pm
- Location: near Nuremberg, Germany
- Has liked: 3 times
- Been liked: 565 times
Re: Bergepanther William
Hi William,
sad to read, but also my decision to go back to the originals. I had two severe stops when track links were jammed with bended guide teeth. Worse however was that the track links didn't follow the roadwheels when curving on rough grounds. Olaf grinded his chevrons down to 1 mm but they did not yet follow the road wheels when steering aside. Therefore I mean that the steel track links may be a nice decoration for a static display but are unusable when driving on rough grounds.
sad to read, but also my decision to go back to the originals. I had two severe stops when track links were jammed with bended guide teeth. Worse however was that the track links didn't follow the roadwheels when curving on rough grounds. Olaf grinded his chevrons down to 1 mm but they did not yet follow the road wheels when steering aside. Therefore I mean that the steel track links may be a nice decoration for a static display but are unusable when driving on rough grounds.
kind regards
Gerhard
____________________________________________________________________
1/6 Scale models: Jagdpanther (AT), Jagdtiger (BT), Königstiger (Porsche turret, NH), Königstiger (Production turret, BT), Pz. IV (SH)
Gerhard
____________________________________________________________________
1/6 Scale models: Jagdpanther (AT), Jagdtiger (BT), Königstiger (Porsche turret, NH), Königstiger (Production turret, BT), Pz. IV (SH)
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
- William Gardeniers
- Posts: 208
- Joined: Fri Jul 24, 2009 5:38 pm
- Location: Netherlands
- Has liked: 47 times
- Been liked: 244 times
Re: Bergepanther William
Made a start with the wood , from a good friend a got some real german oak boards.
I will use this number off plate's 8 there are also drawings with 6
I will use this number off plate's 8 there are also drawings with 6
With Regards William
- Marco Peter
- Posts: 474
- Joined: Mon Feb 26, 2018 12:05 pm
- Has liked: 1173 times
- Been liked: 592 times
Re: Bergepanther William
Nice detail!"...real german oak boards..."
'Konan', my Tiger 1 Mid
'Gunther', my Panther G
'Gunther', my Panther G