Page 1 of 1

Recoil for 'older' models

Posted: Thu May 16, 2013 4:05 pm
by Armortek
Since the introduction of the recoil on our more recent kits, we have received some requests to supply the recoil for the 'older' models which were designed to take the blank firer.

There are two issues with this, compatibility and safety.

Compatibility

Because these models were not designed to take the recoil, they will need re engineering in order for the recoil to function. The complexity or otherwise of this depends upon the model.


Safety

Fitting a recoil in conjunction with a blank firer is potentially very dangerous.


We are aware that amongst our customers there are those with excellent engineering abilities who will be able to overcome the compatibility issue. We have therefore decided that if anyone wishes to engineer their own solution, we will sell a recoil kit to them, however we will first require a declaration to be signed and sent to us stating that under no circumstances would it be fitted to a tank containing a blank firer.

If you wish to order a recoil for an older model, please email us directly at
sales@armortek.co.uk and we will forward a declaration form to you.

Gill

Re: Recoil for 'older' models

Posted: Thu May 16, 2013 8:34 pm
by Graham Ord
Hi Mark
Perhaps you remember the help you gave me wiring up the recoil and latest sound unit on a temporary basis at your works.
This was put in a very old P4 made when you used to sell plans for them.

http://www.armortek.co.uk/Forum3b/viewt ... =12&t=4040

Take care when testing the servo is VERY powerfull.

Graham

Re: Recoil for 'older' models

Posted: Thu May 23, 2013 10:24 am
by Robin Ellis
Hi Graham, can you tell me the make and model of the servo used, and were you running it on 6volts?

Re: Recoil for 'older' models

Posted: Thu May 23, 2013 10:38 am
by Adrian Harris
The Armortek recoil system is supplied with the Savox SA1283SG servo, which will operate at 6V, though not in conjunction with the standard recoil system.

http://www.savoxusa.com/Savox_SA1283SG_ ... 1283sg.htm

Adrian.

Re: Recoil for 'older' models

Posted: Thu May 23, 2013 5:57 pm
by Robin Ellis
Adrian, does it come with a output arm and is it suitable for plugging into a Futaba receiver? It seems a little smaller than the Futaba 3006 24g torque servo that I am currently using.

Re: Recoil for 'older' models

Posted: Thu May 23, 2013 6:07 pm
by Graham Ord
Hi All
When I upgraded the sound and speakers I also bought an Armortek recoil kit to fit and compliment it. The new sound system and recoil are a "wow" at exhibitions. (All the children duck)
Graham