Current Orders Update as of 10/24/12
Posted: Thu Oct 25, 2012 1:30 am
Hi Guys
Here is a update on current orders and how I plan to finish these over the next month or so. Many of these orders are almost complete, some more than others.
Over the last few months it has been very hot in Las Vegas, some times as much as 110 F. It is now starting to cool off and more bearable to work in my shop. I plan to spend around 6 to 8 hours a day working on orders.
I now have 48 orders at the shop to complete. I have spent some time today sorting these orders into priority to complete. As you can see from the pictures below 20 of them require a 20 Ton Jack, this has been a long process for me and I now have all castings completed. I have to assemble one of each to write the assembly instruction which is going to take some time. Therefore I am going to complete orders that have been outstanding for some time and have just a few parts required to complete them. When these are done I will start on the jacks.
Pictures below of the order bins have only your initials on the them, I am sure you can figure out which is your order. Color code dots equal the following
Green = Orders with priority production. Completion 2 weeks or less.
Red = Orders which include a 20 Ton Jack. Completion 4 weeks or less
Orange = New or large orders received over the last two months. These will be done once I have finished the jacks, except for those that only need packing, indicated by a Orange and Green dot.
Blue = Orders for Kubelwagen Cold Start and Custom parts. These are my lowest priority at the moment as there are a lot of new parts to make.
I thank you all for your patients and hope you will bear with me for a little longer while I get this done.
Regards
Mike
Here is a update on current orders and how I plan to finish these over the next month or so. Many of these orders are almost complete, some more than others.
Over the last few months it has been very hot in Las Vegas, some times as much as 110 F. It is now starting to cool off and more bearable to work in my shop. I plan to spend around 6 to 8 hours a day working on orders.
I now have 48 orders at the shop to complete. I have spent some time today sorting these orders into priority to complete. As you can see from the pictures below 20 of them require a 20 Ton Jack, this has been a long process for me and I now have all castings completed. I have to assemble one of each to write the assembly instruction which is going to take some time. Therefore I am going to complete orders that have been outstanding for some time and have just a few parts required to complete them. When these are done I will start on the jacks.
Pictures below of the order bins have only your initials on the them, I am sure you can figure out which is your order. Color code dots equal the following
Green = Orders with priority production. Completion 2 weeks or less.
Red = Orders which include a 20 Ton Jack. Completion 4 weeks or less
Orange = New or large orders received over the last two months. These will be done once I have finished the jacks, except for those that only need packing, indicated by a Orange and Green dot.
Blue = Orders for Kubelwagen Cold Start and Custom parts. These are my lowest priority at the moment as there are a lot of new parts to make.
I thank you all for your patients and hope you will bear with me for a little longer while I get this done.
Regards
Mike