Swivel bolts for MG. mount
Posted: Thu Feb 28, 2008 1:23 am
I made these swiveling bolts for my MG gun mount , last night for my early tiger
The Official Armortek Forum - World leader in one sixth scale metal kits
One sixth scale metal model kits - RC capable
https://forum.armortek.co.uk/
Swivel bolts for MG. mount
Page 1 of 1
Posted: Thu Feb 28, 2008 1:24 am
Posted: Thu Feb 28, 2008 2:07 am
Hi Dale:
Nice job on the "wing nut hold down latchesâ€
Nice job on the "wing nut hold down latchesâ€
Posted: Thu Feb 28, 2008 6:13 am
Heck make us a set too Dale my lathe drill press and shop are all in Houston, I do all my building and drilling with a dremel tool and cordless drill.
In bulding the Late tiger I am always saying if i had my lathe I could turn this or bore out that.
looks Great Dale but gee you have been working on it for over two years!
In bulding the Late tiger I am always saying if i had my lathe I could turn this or bore out that.
looks Great Dale but gee you have been working on it for over two years!
Posted: Thu Feb 28, 2008 8:58 am
Hi Dale,
Nice ones mate!
I simply love your eyes for detailing.
Hi Alvin,
Yes, what would we do without our Dremel
Good thing here is that we who make the Late Tiger will not need those swivelling bolts for the MG gun mount as Late Tigers was without
and makes life a bit easier for us.
Cheers
Kent
Nice ones mate!
I simply love your eyes for detailing.
Hi Alvin,
Yes, what would we do without our Dremel
Good thing here is that we who make the Late Tiger will not need those swivelling bolts for the MG gun mount as Late Tigers was without
and makes life a bit easier for us.Cheers
Kent
Posted: Thu Feb 28, 2008 10:03 pm
Hello Alvin . Kent is right these where on the early tigers only !!. Yes two years of modelling time . Mainly because I work six Days a week . Then seven days a week over the summer holidays . Also I have to build up my brownie points with my wife !! we all know how that works . At least I'm getting my moneys worth out of building it . I know when I get back to my Sherman it will be quicker . Dale
Posted: Fri Feb 29, 2008 9:53 am
Nice work Dale ! What material did you use to make them ?
Also have you tried to contact me the last couple of days ?
Sean
Also have you tried to contact me the last couple of days ?
Sean
Posted: Fri Feb 29, 2008 10:01 pm
Dale,
Nice work on the wing nut details, I did this on my Tiger as they are noticeable. Have you thought about doing the same sort of thing as Kent did to reshape the MG aperture. I really liked the end result with Kent's Panther, it was superb. I say this because I wish I'd done it on my Tiger as there is an obvious difference with the ful size Tiger. I turned the outside like you have done but didn't narrow and deepen the Aperture.
Nice work on the wing nut details, I did this on my Tiger as they are noticeable. Have you thought about doing the same sort of thing as Kent did to reshape the MG aperture. I really liked the end result with Kent's Panther, it was superb. I say this because I wish I'd done it on my Tiger as there is an obvious difference with the ful size Tiger. I turned the outside like you have done but didn't narrow and deepen the Aperture.
Posted: Sun Mar 09, 2008 1:22 am
Very nice touch Dale.Have you managed to have any more runs with your machine yet.Had a good day just before I went back to work , gave mine a good outing in the back yard and destroyed a few garden beds.Great fun!!
Andy
Andy