Page 1 of 1
2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Thu Aug 30, 2012 6:57 am
by Steven Raison
Hey guys i have a question
I started my tank build today and was trying to hold the sides on with the M6x25 and Fixed ends but the threaded ends don't fit the holes. Am i doing something wrong or are these holes to small?
Thanks for any suggestions
Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Thu Aug 30, 2012 10:38 am
by Armortek
Hi Steve
We are not aware of any problem in this area. Can I please ask that you contact us directly if you have any specific problems such as this. The forum is not the first point of call for any quality issues.
Regards
Mark
Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Thu Aug 30, 2012 10:47 am
by phil fitzpatrick
Hi Steve
I remember just having to use the old emery cloth a bit so it pushed in but i
could still get it back out easy.
Same applied to the torsion bars when you get to them.
Cheers
Phil
Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Thu Aug 30, 2012 11:25 am
by Bob Gould
I had to emery cloth all mine out too

Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Thu Aug 30, 2012 4:08 pm
by Stefan Ohlund
same for me

Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Thu Aug 30, 2012 10:43 pm
by Steven Raison
Sorry i wasn't trying to point out any quality issues i just didn't know if it was something that i was doing wrong or not
Thanks for the helpful sanding tips.
Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Fri Aug 31, 2012 2:38 am
by Steven Raison
Thanks guys
Just a little sanding at the beginning of the hole was all it needed, now fit's perfect.
Re: 2012 Tiger 1 Suspention bar fixed end holes to small?
Posted: Fri Aug 31, 2012 9:17 am
by phil fitzpatrick
Welldone Steve
Glad you have managed to sort your parts out.
Enjoy your Tiger build.
Regards
Phil