Tiger and Panther Cupola Clear Resin Prisms Deal
Posted: Wed Jul 11, 2012 2:29 am
Hi Guys
During casting of clear resin prisms for the Tiger 1-2 and Panther cupolas I made a mistake in the mixture and measured the hardener wrong. This resulted in the parts being soft, about the consistency of a hard Jelly Baby, I normally trash these sort of mistakes, but the prisms are good and when fitted inside the prism housing you can not tell the difference between a full hard prism and these.
I thought rather than trash them someone can use them so I am offering them at $75.00 for a full set of 14. Less than half the price of the regular set.
They will come as shown in the picture and will require cutting to size using a very sharp modeling knife. They may distort when cutting them, but will return to their original shape in less than a minute.
Only two sets available.
If you have any questions contact me.
Regards
Mike
During casting of clear resin prisms for the Tiger 1-2 and Panther cupolas I made a mistake in the mixture and measured the hardener wrong. This resulted in the parts being soft, about the consistency of a hard Jelly Baby, I normally trash these sort of mistakes, but the prisms are good and when fitted inside the prism housing you can not tell the difference between a full hard prism and these.
I thought rather than trash them someone can use them so I am offering them at $75.00 for a full set of 14. Less than half the price of the regular set.
They will come as shown in the picture and will require cutting to size using a very sharp modeling knife. They may distort when cutting them, but will return to their original shape in less than a minute.
Only two sets available.
If you have any questions contact me.
Regards
Mike