6th Scale Icons New and on Hold Products.
Posted: Sat Mar 24, 2012 6:53 pm
Hi Guys
With the pending competition of all my back orders I need to plan my work load for the next 2 to 3 months. I have four major projects that I need to complete, three have been worked on over the last few months and one that I offer a few years ago and now plan to offer it again. If you have any interest in these parts please contact me. All four will be put into production regardless of interest in them. The priority of production will depend on interest shown by customers. The 20 ton jack for the Tigers and Panthers, and the Kubelwagen Cold Start have first place in production as I already have several orders for them.
20 Ton Jack. Picture of master parts already made. This will be available as a functional and static jack in white metal and a static jack in resin. It is for the Tiger 1 and 2, and the Panther Series and offered with the appropriate mounting clamps for each tank.
Panther IR Scope. I made this prototype several years ago, but never got any further with it. I do plan to produce this.
Kubelwagon Cold Start for Tanks and Vehicles. This was originally design from a 1:35 scale model which was incorrect. Since making this I have acquired a original user manual. The parts shown in the picture are the parts I have already made for casting, some have to be modified. There will be three sub starter heads in the set that fit into the main starter head. These three heads were used to cold start all German tanks and AFV's. I have upgraded the original set offered to include all fittings to stow the starter in the Kubelwagen and all photo-etched brackets have already been made.
SdKfz 222 Turret Grenade Grill. A few years ago I made a prototype of this, but never put it into production. I now plan on producing this at a customer request. It will be made to fit the Armortek 222 turret and be a simple nut and bolt fitting to the turret. It may fit other turret models, but I do not guarantee it as each model may vary slightly in shape and size.
If you have any requests for parts that you would like made let me know.
Regards
Mike
With the pending competition of all my back orders I need to plan my work load for the next 2 to 3 months. I have four major projects that I need to complete, three have been worked on over the last few months and one that I offer a few years ago and now plan to offer it again. If you have any interest in these parts please contact me. All four will be put into production regardless of interest in them. The priority of production will depend on interest shown by customers. The 20 ton jack for the Tigers and Panthers, and the Kubelwagen Cold Start have first place in production as I already have several orders for them.
20 Ton Jack. Picture of master parts already made. This will be available as a functional and static jack in white metal and a static jack in resin. It is for the Tiger 1 and 2, and the Panther Series and offered with the appropriate mounting clamps for each tank.
Panther IR Scope. I made this prototype several years ago, but never got any further with it. I do plan to produce this.
Kubelwagon Cold Start for Tanks and Vehicles. This was originally design from a 1:35 scale model which was incorrect. Since making this I have acquired a original user manual. The parts shown in the picture are the parts I have already made for casting, some have to be modified. There will be three sub starter heads in the set that fit into the main starter head. These three heads were used to cold start all German tanks and AFV's. I have upgraded the original set offered to include all fittings to stow the starter in the Kubelwagen and all photo-etched brackets have already been made.
SdKfz 222 Turret Grenade Grill. A few years ago I made a prototype of this, but never put it into production. I now plan on producing this at a customer request. It will be made to fit the Armortek 222 turret and be a simple nut and bolt fitting to the turret. It may fit other turret models, but I do not guarantee it as each model may vary slightly in shape and size.
If you have any requests for parts that you would like made let me know.
Regards
Mike