Page 1 of 1
More M2 stuff
Posted: Wed Jan 30, 2008 7:19 pm
by Dave Dibb (Armorpax)
Hi All,
can you see what it is yet..........................................
Should have the masters finished later this week for the early style 50 cal mount to finish off the basics for the M2. It will have the early tin ammo box with the sloping bottom.
Best regards
Dave
Posted: Fri Feb 01, 2008 10:50 pm
by Dave Dibb (Armorpax)
Hi All,
Just the ammo tin to do and that’s another one ready for the moulds,
Cheers
Dave
Posted: Sat Feb 02, 2008 9:25 am
by Tony Read
Hi Dave!
Fantastic work! I have no idea how you get your parts looking that good. I'd chop off my right arm to be that good (err, hang on, if I chopped off my arm I would'nt be able to do any modelling at all, so thats not very bright!). Seriously though, first class!!!
BTW - are you going to make a tilting skate as well? The WSC and M2 should have one at the front so that it can follow the slope of the skate rail over the doors.
Posted: Sat Feb 02, 2008 11:11 am
by Dave Dibb (Armorpax)
Hi Tony,
glad you like, time permitting the revolving carriage and the fixed sockets for the later M2 and M3 versions will follow along with the M49 ring mount and later 50 cal mount (M35 mount I think). Lee Sellars has asked about the AP mines also which we might try and fit in for the side racks.
As soon as this mount is finished though all efforts are going to have to go into finishing the quad before I can start any of these other bits.
Then of course we already have requests for this and that for the Jagdpanther, AAAAAAAAAAAAAGGGGGGGGGGHHHHHHH!!!
If only there were 127 hours in a day and I had 25 pairs of hands,
Best regards
Dave
Posted: Sat Feb 02, 2008 12:21 pm
by Tony Read
Dave,
I have an original M1 AT mine if you want to copy it. Think I sold the tilting skate for the WSC, but I'll have a look in case you want to copy that as well for the M2 guys.
Posted: Sat Feb 02, 2008 3:02 pm
by Dave Dibb (Armorpax)
Hi Tony,
that would be very handy as I have been unable to find originals of either to work from, will give you a shout once the other bits are out of the way and see what we can sort out,
Best regards
Dave
Posted: Sun Feb 03, 2008 12:26 am
by Dave Dibb (Armorpax)
Posted: Mon Feb 04, 2008 2:16 pm
by Tony Read
Top, top,top,top notch work there! There is only one word to describe what you have done and that is awesome and astounding. Ok, thats two words but you get my drift! I'll be ordering some of those for sure.
As for a tilting skate looks like I've got one if you want to copy it some time for your WSC or the M2.
Posted: Fri Feb 22, 2008 9:19 pm
by Dave Dibb (Armorpax)
Hi All,
another little piece off my WSC that will suit the halftrack, going to get these moulded soon,,
cheers
Dave
