The Official Armortek Forum - World leader in one sixth scale metal kits

Hi all,

I need to make some vison ports for my Panzer IV but have no reference to measure from to scale to 1/6th. Would anybody know what dimensions theses would be as in length, width and thicknesses.

Thanks

Chris

Hi,

not sure exactly which parts you mean but you can download all my reference pics from one of the Ausf.J in Parola, Finland. I tried to take alot of pics with a tape measure in the pic but the sun was too bright so the scale is washed out in many of them. Maybe it will help anyway.

Anyone else needing reference pics can download them as well, just don't use them for anything comercially.

http://home.laban.nu/parola/Parola.zip

Regards
Björn

Hi Bjorn,

The ports I am refering too are the ones that were fitted to the earlier Ausfs and were locating on the turret in front of the side hatches and on the side armour which gave the driver and MG gunner views to the side. As I have no kit to scale up from I dont want to really guess the sizes just by studying pictures.

Chris

Chris
I can get the measurements from the real thing if you want. I can go to Aberdeen Proving Grounds this weekend. Is there anything else you need measured while I am there?

Chris
Got the measurements for the vision port, from a Pz IV ausf F2. It is 13" (330.2 mm) long and 7 3/8" (187.325 mm) wide, it is 7/8" (22.225 mm) thick at the ends and 1 1/8" (28.575 mm) thick in the middle. I made up an excel sheet with other dimensions and pictures, give me your email address and I will send it to you.

Hi Mike,

Your a "STAR" I will have to put you at the top of my Christmas card list. I have sent you a PM with my e-mail.

Thank you very much for your help

Chris

email sent, let me know if you got it.