The Official Armortek Forum - World leader in one sixth scale metal kits

Hi Guys

Need some help in completing my Tiger 1 and 2 lock tab sets, I now have all the parts except one and that is the drive cog hub for the early - mid Tiger 1. This is a very important part as the lock tabs have a unique shape and must be the correct shape and size to fit the Armoertek hub. The ideal would be for someone to loan me a hub, failing that the exact measurement will work. See picture for details I need.



Regards
Mike

The 2003 Mid and the "Early" Tiger had cast sprocket hubs - with built in tabs.
And as far as I'm aware, the 2010 Mid Tiger came with the locking tabs on the photo-etched sheet.

Adrian.

Hi Adrian

Thanks for that, I thought that was the case, but my early Tiger 1 has been long gone and I could not remember. If someone can confirm the lock tabs for the hub are included in the 2010 mid Tiger I will drop them from the set and move on to getting all the sets made.

Regards
Mike

Hello Mike,

Yes Adrian got it right,
the lock tabs are included on a photo-etch sheet
for the mid tiger 1 (2010 )

greetings Yves

Late Tiger also

Hi Yves and John

Thanks for the info, will have to rethink the sets I planned to offer.

Regards
Mike

Hi Mike,
Are you still looking to supply wheel nut locking tab sets for the Mid (2010) Tiger 1?

Steve

Hi Steve

Yes this set will be one of the ones I will produce, just got a lot going on at the moment and no time to complete them.

Regards
Mike

Hi Mike.
Let me know when you do produce these. I am interested in a set or two.
Thanks,
Simon.