Page 1 of 2
Detail Set for Panther drivers hatches - 1st Production run
Posted: Sun Dec 16, 2007 1:18 am
by Dave Dibb (Armorpax)
Hi All,
Ready for production, see post at bottom of thread if your interested in a set!!
finally been persauded to do the detail set for the Panther Hatches, first masters below, just the counterweight assembly to do and these will go off to our casters for release hopefully some time in January,
cheers
Dave
Posted: Sun Dec 16, 2007 9:27 am
by Antony Rowley
Hi Dave,
Excellent
. Put me down for a set please.
Thanks Antony
Posted: Sun Dec 16, 2007 10:12 am
by Yves Maurice
Hi Dave!
Is it possible to do the same for all the hatches of the tiger? I think this is just THE parts who are missing and I 'm sure a lot of builders wants them!...
Posted: Mon Dec 17, 2007 7:24 am
by Derek Attree
Hi Dave
Very nice
I want a set please.
Derek
Posted: Mon Dec 17, 2007 10:07 pm
by Dave Dibb (Armorpax)
Hi All,
the finished article, these are going off for moulding this week and as soon as I know the mould layout will be able to advise prices.
Armorpax will be closing for Christmas on the 21st Dec. and we will re-open 3rd Jan.
Merry Christmas to all,
Best regards
Dave
Posted: Mon Dec 17, 2007 10:57 pm
by Tim Bowman
Outstanding Dave! I look forward to hearing when they are available.
Have a Merry Christmas
Tim
Posted: Tue Dec 18, 2007 12:30 pm
by Kent Wiik
Second to the others reaction -
very nice items Dave!
Only one tiny reflection
The locking hole on the outside was square shaped, not round.
It also had a more "flat" look.
As this locker is also placed on other parts like the loaders hatch and engine hatch would it be possible to have this part made to be bought solo?
Cheers
Kent
Posted: Tue Dec 18, 2007 8:02 pm
by Dave Dibb (Armorpax)
Hi Kent,
sorry they went off this morning to our casters, the hole actually forms the location for the inner handle so had to be round, I am sure having seen your work so far you will be able to add a little milliput and make a round pin fit a square hole
.
A very Happy Christmas to you and your family,
Best regards
Dave
Posted: Tue Dec 18, 2007 9:14 pm
by Kent Wiik
Ok Dave,
I will keep my square file ready for work.
Happy Christmas for you and yours as well.
Best regards
Kent
Posted: Wed Dec 19, 2007 7:42 am
by Derek Attree
Hi Dave
Thay are very nice can you tell me are they going to be
white metal or resin ?
Thanks
Derek
Posted: Wed Dec 19, 2007 8:56 am
by Dave Dibb (Armorpax)
Hi Derek,
all metal,
Merry Christmas
Dave
Posted: Wed Dec 19, 2007 1:03 pm
by Derek Attree
Dave
Merry Christmas to you and 'er indorors.
Derek
Posted: Wed Dec 19, 2007 1:14 pm
by Ian Rodney
Hi Dave,
All metal you say, that's good.
I'll be interested in buying a detailed sets for my Panther G hatches.
Whenever your able to advise us on prices after the New Year....
A Merry Christmas & A Happy New Year......"Hogmanay"
Cheers
Ian
from Glasgow, Scotland
Panther hatch detail
Posted: Wed Feb 06, 2008 3:59 pm
by Marcel de Groene
Hi Dave,
Looking superb. Please add me to the list for a set. Only a star antenna and a cleaning rod set to make it complete.
Regards,
Marcel de Groene
Toys Unlimited
Posted: Fri Feb 15, 2008 9:48 pm
by Dave Dibb (Armorpax)
Hi All,
we will be doing a production run of the Panther hatch sets next week, as with all of these things we invariably get more want them than we run on the first order so I am trying to gauge how many to get run off.
I know many of you have contacted me direct but if not and you would like a set could you please drop me a line to confirm. The run quantity will be based on how many confirm and a few extra for stock. I will be deciding on the batch size Tuesday/Wednesday next week with kits being ready to ship around a week after that,
Price is £21.50 a set + p&p (a set comprises detail parts for both front hatches)
cheers
Dave