Armortek

Posted: **Sat Aug 28, 2010 7:03 pm**

Hello Chaps

As said earlier i will be there for both days. All Armorpax accessories will be through me again so Dave can have a day off.
I will be selling my Action figures as normal and new for this year is the Die Werkstatt range of accessories.
On Sunday i will be doing an introduction to Air Brushing with a range of my air brushes.For those who havent done any of this type of painting you are welcome to have a go session.
Please let me know who is interested for this session on sunday so i can estimate what to Bring.

Also if anyone has something in particular for me to bring down please let me know now.

Lee

Posted: **Thu Sep 02, 2010 3:26 pm**

Posted: **Sat Sep 11, 2010 6:09 pm**

hi lee can i give it a try never know maybe get my tiger done one day after lessons

Posted: **Sat Sep 11, 2010 9:00 pm**

Hi Lee,

Can Annabel and myself have a go please.

Regards,

Sarah

Posted: **Mon Sep 13, 2010 3:54 pm**

Hello Friends

If you have something small to bring ie spade, shackels etc by all means bring them along. Please prime them. I will bring a selection of stuff.
We will be starting around 10:15am.
Everyone who is attending on sunday is welcome. look forward to seeing you all there.
Hey i might learn something of Paul on Zimmeriting.

lee

Posted: **Wed Sep 15, 2010 7:03 pm**

Hi lee can you put two more on the list for your class please.
thanks martin

Posted: **Sun Sep 26, 2010 6:22 pm**

Here are some photos I took during Lee's demonstration:

He started off with some primed side armour panels, which were just the right size for the demonstration and handy to pass around:

Posted: **Sun Sep 26, 2010 6:23 pm**

Lee gave examples of broad coverage, as well as thinner lines and effects:

Posted: **Sun Sep 26, 2010 6:24 pm**

Rust streaks being added to the panel:

Posted: **Sun Sep 26, 2010 6:24 pm**

And the finished rust effect:

Posted: **Sun Sep 26, 2010 6:29 pm**

Lee gave lots of other practical examples, such as how to join two colours of camouflage together, as well as showing what happens with too much and too little air pressure.

Many thanks to Lee for a very informative demonstration, lots of useful information and insights into the equipment and the techniques involved.

Adrian.

Posted: **Sun Sep 26, 2010 7:10 pm**

Hello Adrian

Thank you for posting that. I was just a pleasure to display some of the air brushing skills. As long as you all learnt something. If you all have that is the iceing on the cake.

Lee

Posted: **Sun Sep 26, 2010 9:57 pm**

Lee, if you do icing of cakes, then your birthday cakes must be brilliant!
Steve

Armortek

Open day 2010 Newthorpe Models Sat and Sun

Open day 2010 Newthorpe Models Sat and Sun

Air Brushing at the open day