Page 1 of 1
Comet Measurements
Posted: Wed Apr 14, 2010 6:34 pm
by robert michael hilton
I have started to adapt my no longer in use, motorcycle trailer, to transport the Comet, when received and built. Can I have the overall length which includes the gun. I know the tank body is 42.5 inches. Thank you, Mick.
Posted: Wed Apr 14, 2010 9:13 pm
by Adrian Harris
The usual dimensions given are 25' 1.5", which scales out in 1/6th to be 50.25".
Adrian.
Posted: Thu Apr 15, 2010 12:27 pm
by Matthew Holt
Is that with the turret facing aft in the parked position? It seems the barrel wouldn't hang over the back end that much but I could be wrong.
Comet Measurements
Posted: Thu Apr 15, 2010 3:49 pm
by robert michael hilton
Thank you for your replies, I was considering the option with the gun facing forward....never crossed my mind to reverse the gun.
Good idea, if I am short of space.
If the overall length is 50.25" I can cut the baseboard to suit, with room to spare.
This will be my first Armortek model....the idea would be to show the completed Comet at local vintage rallies,next year. Thank you again..mick
Posted: Thu Apr 15, 2010 4:09 pm
by Adrian Harris
> with the turret facing aft in the parked position
Apparently, that way round it measures 21' 6"
All these measurements were taken from websites rather than original documentation so if anyone happens to have corroboration it would be greatly appreciated
Adrian.
Posted: Thu Apr 15, 2010 5:41 pm
by Stephen White
Adrian
I've got copies of the original handbooks and will look at the weekend.
Regards
Stephen
Comet Measurements
Posted: Thu Apr 15, 2010 6:15 pm
by robert michael hilton
Ok, I will delay cutting the expensive ply, purchased today. The trailer is no longer needed as I sold my New Hudson Autocycle last year. The trailer was newly purchased two years ago and still in good condition. I needed to find a use for it, will make an ideal transporter....thank you for your replies....mick
Posted: Fri Apr 16, 2010 10:09 pm
by David Skeldon
Hi,
I read some ware that trailers are not the best thing from tanks as they bounce to much over bumps.
David
Comet Measurements
Posted: Sat Apr 17, 2010 3:22 pm
by robert michael hilton
Trailers can bounce when unloaded...this one is very heavy and stable.The Comet will have it's own box and padding, with appropiate straps. Thanks for the advice though...mick
Dimensions
Posted: Fri Apr 23, 2010 10:20 pm
by Stephen White
Robert
Apologies for taking so long to get to my references.
The Comet 1 Handbook quotes the following official figures:
Overall length (gun front) - 301.5 inches
Overall length (gun rear) - 258 inches
Width - 120 inches
Height - 105.75inches
Height to top of turret ring - 66.5 inches
Hope that is of use.
Regards
Stephen
Comet Measurements
Posted: Sat Apr 24, 2010 9:40 am
by robert michael hilton
Hello Stephen, thank you for information,I have allowed enough space on the base area, to box the Comet completely. I know these are minor details, my enthusiasm is running away with me at the moment. This is my first Armortek tank and I am itching to start the build....Mick