Page 1 of 3
Panzer III Cone head Bolts
Posted: Mon Apr 05, 2010 11:26 pm
by martin pitcairn
I am looking for Cone head bolts, Steve has run out and is waiting for more people to order, so if anyone is looking please order with Steve,
Posted: Tue Apr 06, 2010 7:35 am
by Jim Fowler
Martin,
I told Steve I would be interested in obtaining 50 more and got same from him. So, please count me in
Do I need to email Steve again?
Posted: Tue Apr 06, 2010 4:14 pm
by Tim Bowman
Hi Martin
I was planning on another 30-40 cone bolts from Steve for my Stug III conversion and a few other projects so add me to the list if it helps.
Kind regards
Tim
Posted: Tue Apr 06, 2010 4:15 pm
by Tim Bowman
sorry for the double post. Not sure why I couldn't delete this one though.
Posted: Tue Apr 06, 2010 6:36 pm
by Martin Diessel
You can count on me, too. How many I may need on the panzer 3?? Martin
Posted: Tue Apr 06, 2010 7:03 pm
by martin pitcairn
jim, i am sure steve will follow the thread. Martin i think you need 87 depending on the model, for example on the L version with the spaced armour on the gun mantle i am not sure if they used nuts and bolts or cone heads.
Posted: Wed Apr 07, 2010 11:01 am
by steve winstone
Hi Martin,
I now have enough orders to order the 500 cones, as soon as they arrive I will let you know. I have made a note of the ones I know of, Jim, Tim,Martin.
Thank you for your response.
Steve
Posted: Wed Apr 07, 2010 4:29 pm
by vincent hung shu yue
Hello Steve
Count me for 100.
Posted: Thu Apr 08, 2010 7:52 am
by Jim Fowler
Thanks Steve!
Now, if I could just find a source for working, 3mm Castle nuts??
Posted: Thu Apr 08, 2010 9:57 pm
by steve winstone
Hi Jim,
I could make up castings for the Nuts, but I would have the same problem as I need a minimum order of 500 for the caster to make it worth his while.
Regards
Steve
Posted: Fri Apr 09, 2010 2:55 pm
by Jim Fowler
Steve,
Do you think you can develop and estimated cost? I could use 100 of them, I am confident of that. I am just thinking that with a cost estimation and a posting here specifically asking if others have an interest, the other 400 could be gleened. And, if not, I could see if I could "pad" the balance needed.
Anyone else interested in 3mm, brass Castle Nuts?
Posted: Fri Apr 09, 2010 3:15 pm
by David Da Costa
I would be interested in castle nuts for my PIII and King Tiger. Not sure how many I would need.
David
Posted: Sat Apr 10, 2010 11:06 pm
by Mark Bennett
Steve,
I would also be interested in castle nuts if you decide to cast them. For my KT, Pz III, etc. I would probably order 100.
Mark
Posted: Sun Apr 11, 2010 12:55 am
by Martin Diessel
Steve please add also a 100 castle nuts for me!
Martin
Castle Nuts
Posted: Sun Apr 11, 2010 4:08 am
by Stephen White
Steve
I'd be interested, particularly if they were tapped M3.
Regards
Stephen