CHALLENGER 2 PRE-ORDERS
OPEN ON THE 6TH FEB 2025


kingtiger side skirt bolts

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
chris fry
Posts: 244
Joined: Tue Jul 24, 2007 1:21 pm
Location: southampton
Been liked: 394 times

kingtiger side skirt bolts

Post by chris fry »

hello all,

anyone interested in some 7BA std head x 3m tread and 10mm long, they are to replace the std kit m3 bolts, these are the same as what Simon manning used on his kit, you will need about 44 but i will sell them in packs of fifty, cost will be £12 plus postage,
anyone interested please pm me.
thanks, chris.
Top
Joseph Redmond
Posts: 5
Joined: Sun Aug 17, 2008 5:37 pm
Location: Carlow, Ireland

King Tiger Side Skirt Bolts

Post by Joseph Redmond »

:Dear Chris

Yes I am interested in purchasing 50 side skirt bolts from you. Please advise when they are available and how you accept payment. As soon as they are available I will sent payment

Regards

Joe
Top
Scott Swartz
Posts: 16
Joined: Sat May 30, 2009 7:44 pm
Location: Boston, Massachusetts, USA

Re: kingtiger side skirt bolts

Post by Scott Swartz »

chris fry wrote:hello all,

anyone interested in some 7BA std head x 3m tread and 10mm long, they are to replace the std kit m3 bolts, these are the same as what Simon manning used on his kit, you will need about 44 but i will sell them in packs of fifty, cost will be £12 plus postage,
anyone interested please pm me.
thanks, chris.
Chris,
I'm interested in the bolts for my KT. Do you still have them available? If so, what is best way to proceed with payment and shipping? I am located in US.

Thanks,
Scott
Top
Post Reply

Return to “Craftsman's Market”