BOLT AND NUT TO SHARE

[vincent hung shu yue]

Hi all friend,
I have 1000 M3 thread 12mm long with small hex head (flat to flat is 4mm and thickness is 3mm) to share with you . Free of charge, first come first serve. I will pay for the shipping cost but you have to make donation the same amount of shipping cost to any charity relating to dog rescue.

[Chang]

Hi Vicent,
Long time no talk as we were in http://www.rctw.net.tw . Hope you still remember me. How are you all these years?

Quite a while ago, I have received a small box of very small screws and nuts (courtesy from you, as I remembered), including:
M1.5 x 6mm & M1.5 x 12mm(?) in both dome head and hexagon head screws and nuts;
M2 x 8mm & 12mm hexagon head and countersunk head screws and nuts.

All of them in 3 small bags

screws-1.JPG (112.91 KiB) Viewed 2406 times

M1.5 dome-head, M2 hexagon and countersunk head, various length screws & nuts.

screws-2.JPG (99.59 KiB) Viewed 2406 times

M1.5x6mm dome-head screw (nut not shown)

screws-3.JPG (81.89 KiB) Viewed 2406 times

They are very useful, especially the M1.5 dome-head screws and nuts, used a lot as rivets to added on my 1/6 Armortek model (King Tiger, Elefant, PAK43/41 and recently in Jagdtiger.

I have tried to find out any seller (locally and globally) all these years without successful. I wonder if you know any seller in Hong Kong and/or in China that I can buy from. The M1.5 x 6mm dome-head screws and nuts are the one I have used mostly.

Wish you safe and healthy in this uneasy 2020.

Best regards,

Lerh-shen Chang ("Change" was my user ID in www.rctw.net.tw.)