Hi all friend,
I have 1000 M3 thread 12mm long with small hex head (flat to flat is 4mm and thickness is 3mm) to share with you . Free of charge, first come first serve. I will pay for the shipping cost but you have to make donation the same amount of shipping cost to any charity relating to dog rescue.
BOLT AND NUT TO SHARE
-
- Posts: 191
- Joined: Fri Jun 27, 2008 5:54 am
- Location: hksar
- Been liked: 24 times
- Chang
- Posts: 1032
- Joined: Mon Jul 21, 2008 1:45 am
- Has liked: 14901 times
- Been liked: 371 times
Re: BOLT AND NUT TO SHARE
Hi Vicent,
Long time no talk as we were in http://www.rctw.net.tw . Hope you still remember me. How are you all these years?
Quite a while ago, I have received a small box of very small screws and nuts (courtesy from you, as I remembered), including:
M1.5 x 6mm & M1.5 x 12mm(?) in both dome head and hexagon head screws and nuts;
M2 x 8mm & 12mm hexagon head and countersunk head screws and nuts.
They are very useful, especially the M1.5 dome-head screws and nuts, used a lot as rivets to added on my 1/6 Armortek model (King Tiger, Elefant, PAK43/41 and recently in Jagdtiger.
I have tried to find out any seller (locally and globally) all these years without successful. I wonder if you know any seller in Hong Kong and/or in China that I can buy from. The M1.5 x 6mm dome-head screws and nuts are the one I have used mostly.
Wish you safe and healthy in this uneasy 2020.
Best regards,
Lerh-shen Chang ("Change" was my user ID in www.rctw.net.tw.)
Long time no talk as we were in http://www.rctw.net.tw . Hope you still remember me. How are you all these years?
Quite a while ago, I have received a small box of very small screws and nuts (courtesy from you, as I remembered), including:
M1.5 x 6mm & M1.5 x 12mm(?) in both dome head and hexagon head screws and nuts;
M2 x 8mm & 12mm hexagon head and countersunk head screws and nuts.
They are very useful, especially the M1.5 dome-head screws and nuts, used a lot as rivets to added on my 1/6 Armortek model (King Tiger, Elefant, PAK43/41 and recently in Jagdtiger.
I have tried to find out any seller (locally and globally) all these years without successful. I wonder if you know any seller in Hong Kong and/or in China that I can buy from. The M1.5 x 6mm dome-head screws and nuts are the one I have used mostly.
Wish you safe and healthy in this uneasy 2020.
Best regards,
Lerh-shen Chang ("Change" was my user ID in www.rctw.net.tw.)
------------------------------------------------------------------
Es braust unser Panzer im Sturmwind dahin.....
Es braust unser Panzer im Sturmwind dahin.....