Armortek

Hi Guys Im looking for scale nuts and bolts and cone head bolts .All the suppliers I have found There stuff is to small.Any help would great.

Thanks Tom Schulze

Hello Tom,
Armortek did do a set of square , cone , and stand off bolts suitable for the Tiger . Drop Gill an email , they may have some left.
As to other sizes of scale nuts and bolts , try the people that do live steam model traction engines, and loco,s .

Hi Tom

Dave is correct we do have these parts, follow this link to the original posting for details:

http://www.armortek.co.uk/forum/viewtop ... =cone+head

Gill

Hi Tom

I use these guys for scale fasteners. They should have everything you are after. The 2-56 and 3-48 brass hex heads are what I used most of on my Panther's rear deck. They supply the nuts as well plus some small scale rivets.

http://www.microfasteners.com/

Hope that helps

regards
Tim

Thanks for the site Tim . I'm puting in a big order next week . I have allready received a Quote from Bill , they seem to be a good company to work with . I'm getting brass hex head 2-56 also 0-80 screws . with nuts . Is there any thing else you think I should have ?? These will be great for the PZIII .. Dale

Here is a way to see what the bolts look like in relation to 1/6 scale.

[img][img]http://i35.photobucket.com/albums/d189/ ... G_0852.jpg[/img][/img]

Here is what they look like on my Pz IV.

[img][img]http://i35.photobucket.com/albums/d189/ ... G_1272.jpg[/img]
[/img]

Tim . Thankyou for puting me onto Micro fasteners . My order of 800 brass nuts and hex bolts turned up today . What a great company to deal with .. A bag of 2-56 brass hex bolts cost me $ 7.20 US dollars here in Australia at my hobby shop they cost $ 6.95 AUD for a bag of 10 ...Mike thanks for your photos of your Pz IV and the scale nuts .. Dale