Panzer III/IV Split Hatch

Armortek owners can buy and sell 1/6 scale accessories and detail parts. note: Armortek does not necessarily endorse these products and can accept no liability for contractual disputes
Post Reply
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:
Contact Dave Dibb (Armorpax)

Panzer III/IV Split Hatch

Post by Dave Dibb (Armorpax) »

Hi All,

We will be starting production of the split hatch for the Panzer III in about 10 days. I would like to try and run a load together rather than casting in dribs and drabs so if you are definitely in for one can you drop me a line at sales@armorpax.com. Once we are ready to go will let everyone who has contacted me know and then once payments are in will run the batch.

Cost of the hatch will be £19.50 + P & P.

Best regards

Dave

Image
Image
Image
Image
Image
Image
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................
Top
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:
Contact Dave Dibb (Armorpax)

Post by Dave Dibb (Armorpax) »

Hi All,

Due to shed loads of white stuff from the sky and rather a lot of parts for a certain King Tiger :wink: my metal caster is running a little behind. I am hoping they are going to run the batch of Split hatches towards the end of this coming week.

For all those desperately wanting to send me money don't panic, I don't like to invoice you until I can be certain of when I will ship. I have list of all those who have contacted me and once I have a shipping date you can be certain I will contact you :D

Cheers

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................
Top
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:
Contact Dave Dibb (Armorpax)

Post by Dave Dibb (Armorpax) »

Hi All,

Split hatches are now in, I will be emailing those who contacted me over the next few hours as I get them packed

Best regards

Dave

Image
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................
Top
Antony Rowley
Posts: 664
Joined: Thu Jul 12, 2007 8:32 pm
Location: Back to Wirral home of the brave or not so brave, England
Contact:
Contact Antony Rowley

Post by Antony Rowley »

Hi Dave,

Payment sent. Look forward to receiving more of your excellent parts that help make our models even better :wink:

Thanks Antony
Nord-West KampfGruppe, 1/6th Hetzer, 1/6 Schwimmwagen, 3 x r/c 1/6th Kettenkrad, 1/6th Marder Ausf M, 1/6th Panzer II Static...the collection is growing again....
Top
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:
Contact Dave Dibb (Armorpax)

Post by Dave Dibb (Armorpax) »

Many thanks Antony.

Hopefully all those who emailed me about the hatches have now had a reply. If you did contact me and you haven't received anything drop me another email and/or PM.

Best regards

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................
Top
Antony Rowley
Posts: 664
Joined: Thu Jul 12, 2007 8:32 pm
Location: Back to Wirral home of the brave or not so brave, England
Contact:
Contact Antony Rowley

Post by Antony Rowley »

Hi Dave,

All items received fine. Just got to fit them all now. Quality as usual :wink:

Image

Thanks Antony
Nord-West KampfGruppe, 1/6th Hetzer, 1/6 Schwimmwagen, 3 x r/c 1/6th Kettenkrad, 1/6th Marder Ausf M, 1/6th Panzer II Static...the collection is growing again....
Top
Stephen White
Site Admin
Posts: 3114
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 1038 times
Been liked: 2111 times
Contact:
Contact Stephen White

Post by Stephen White »

Dave

Just received mine. The level of detail is quite superb, the photos really don't do it justice. Any chance you could tell us when the other Pz III details will be available?

Thanks again.

Stephen
Top
Dave Dibb (Armorpax)
Posts: 1158
Joined: Thu Jul 12, 2007 6:03 pm
Location: Hampshire
Has liked: 116 times
Been liked: 1106 times
Contact:
Contact Dave Dibb (Armorpax)

Post by Dave Dibb (Armorpax) »

Hi Stephen,

I am chasing my metal caster for an ETA on the moulds for the vision ports and hooks etc. We have been overloading them lately and with their other work they are unable to get orders out as quickly as usual which is why we had a delay on the split hatches. I am hoping we would have them in production by the end of the month and will let you know more when I do,

Best regards

Dave
www.armorpax.net

There used to be a nice banner here till Photobucket lost everything.............................
Top
Jim Fowler
Posts: 279
Joined: Fri Aug 01, 2008 1:01 am
Location: Grafton, OH - USA

THANKS!

Post by Jim Fowler »

Dave,

The spit hatch looks AWESOME! - can't wait to get mine from Lee. I want to once again thank you for making this item (and others) available - it really great to have someone make this effort. And, I know my build will be all the better!
Thanks,

Jim
Top
stuart holden
Posts: 70
Joined: Thu Jun 26, 2008 7:40 am
Location: taunton somerset

Post by stuart holden »

Hi Dave

Got mine today and i am blown away the detail and the wormanship it is 1st class . Well done Dave . many thanks Stu
Top
Post Reply

Return to “Craftsman's Market”