Page 1 of 1
Benedini Rotary Encoder
Posted: Tue Nov 26, 2024 2:33 pm
by Steve Stuart
Does anyone have a Benedini Rotary Encoder, unused, or used and redundant, lurking in a spares box? I have need of one.
Steve
Re: Benedini Rotary Encoder
Posted: Tue Nov 26, 2024 3:22 pm
by Adrian Harris
If you don't get an original, I'm pretty sure I've got the parts to make one.
Adrian.
Re: Benedini Rotary Encoder
Posted: Tue Nov 26, 2024 4:13 pm
by Dennis Jones
Steve, I have got an old tx with one of my conversions on it if you want it.
Dennis
Re: Benedini Rotary Encoder
Posted: Tue Nov 26, 2024 5:09 pm
by Steve Stuart
Thank you Adrian and Dennis, if an original is not available I may well be in contact with you both to see how to move forward. It is good know that I have a long stop in place! Steve
Re: Benedini Rotary Encoder
Posted: Tue Nov 26, 2024 8:28 pm
by Didier Molard
Hello all.
as it is "hard" to find one, i would also be interested if someone has the info on how to make one with what parts... (the rotary switch can easily be found by just looking well at the original on bendini site)
Regards
Didier
Re: Benedini Rotary Encoder
Posted: Wed Nov 27, 2024 12:47 am
by Mark Heaps
I have got one un-used. Not yet fitted to a TX . Not willing to part with it but could take detailed photos if required. Would require less effort than someone removing one from a TX.
Re: Benedini Rotary Encoder
Posted: Wed Nov 27, 2024 12:03 pm
by Dennis Jones
Didier pleae email me and I will send you the diagram. Needs about 17 resistors, 12 or 8 position rotary switch and 2 way flick switch.
Dennis.