Armortek • Tiger 131

Page 1 of 1

Tiger 131

Posted: Tue Sep 03, 2024 6:43 pm

by David Brady

Hi All,

I bought David Wilkins tiger around four years ago. A superb build with many improvements.

A few pictures of some recent work.

: Shortly after receiving I fitted the motors, then it sat for four years.

: Mike Stannard Loaders hatch fitted.

: Mike Stannard early vent fitted

: Steve Winstone rear bin with Mike Stannard padlocks.

: Steve Winstone tool box

: Mike Stannard snow shovel and clips fitted, looking at some original pictures I prefer this position.

: Tiger 131 spade location.

DB

Re: Tiger 131

Posted: Mon Sep 09, 2024 9:20 pm

by David Brady

Mike stannard tool clips made today in preparation for swapping out fitted tool clips.

: Clips for removal - all tool clips are as pictured.

: Mike stannard tool clips

: 10 pcs assembled

Cheers

Re: Tiger 131

Posted: Tue Oct 01, 2024 10:46 pm

by David Brady

More progress

: Tools and clips removed, hammer will be used as this has a steel head, handle length will be reduced a little.

: Axe Cover as supplied was to large - I compared this to a Mike stannard one fitted to my Late Tiger - this was reduced in width and length

: Spade cover swapped out with a Mike Stannard one

: Tim Catton spade reduced/reshaped to fit Mike's head cover, also handle reduced to fit as best as possible.

: A selectin of spades from different suppliers, Mike stannard on the left is my personal favourite, reshaped Tim Catton at the back

: New tools fitted, Tim Catton spade and Mike Stannard axe and clips.

: About right

: Steve Winstone bump stops to fit next

Cheers