Miniature belt linisher
Posted: Wed Apr 10, 2024 7:38 pm
Hi all.
I'm building a series 1 4x4 kit and wanted a small belt linisher for flattening parts. There are a few on Ebay but they look pretty weak.
Proxxon do similar machines but they are silly money.
So I bought some proxxon belts and set about making a linisher from scratch.
A few bearings and some odds and ends of metal and here we go. A 40mm width belt with about 60mm of bed length.
It's driven by a Foredom motor with flexi driveshaft so I can move it round the bench.
I'm building a series 1 4x4 kit and wanted a small belt linisher for flattening parts. There are a few on Ebay but they look pretty weak.
Proxxon do similar machines but they are silly money.
So I bought some proxxon belts and set about making a linisher from scratch.
A few bearings and some odds and ends of metal and here we go. A 40mm width belt with about 60mm of bed length.
It's driven by a Foredom motor with flexi driveshaft so I can move it round the bench.
- 20240410_135955.jpg (180.81 KiB) Viewed 987 times