Page 5 of 6
Re: Yves sdkfz 251 update
Posted: Sun Dec 11, 2022 5:54 pm
by yves mouton
Hello,
this weekend i workt on the brackets to fix the servo's on to open the 4 visors.
Also fix the floor to put the electronics on, i fix the floor on the end of the torsion bars.
I drill holes 2,5 mm and tap with M3 thread ( torsion bars cant come loose )
I fix it with M3 button screws.
The velcro is to fix easy the modules on the floor.
I also put the Idlers and wheels
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Sat Jan 07, 2023 4:07 pm
by yves mouton
Hello,
A small update on the 251
Made a locking system on the ammo box
Put the servo's in for the 4 driving visors
Working on the back seat ( wood ) not yet finished
Also working on the side panel servo's and backdoor ( pictures comming soon )
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Mon Jan 23, 2023 7:20 pm
by yves mouton
Re: Yves sdkfz 251 update
Posted: Wed Jan 25, 2023 6:08 pm
by yves mouton
Hello,
A little update on the electronics and bench.
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Sun Feb 26, 2023 6:47 pm
by yves mouton
Hello,
Today i am working on the pak 40
It is also a lot of work to put the wires away
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Sun Feb 26, 2023 8:03 pm
by Tim Page
Thats coming along nicely Yves.
Here is a pix of the interior of my 251.
- IMG-6124clean-s.jpg (226.81 KiB) Viewed 8455 times
All the detail has been 3d printed apart from the wooden slats on the seats.
Cheers
Tim
Re: Yves sdkfz 251 update
Posted: Sun Feb 26, 2023 9:44 pm
by yves mouton
Hello,
Nice looking details Tim
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Wed Apr 26, 2023 6:31 pm
by yves mouton
Hello,
Finaly a update on the 251,
Ammunition box
Fix the on and off switch in the seat.
Fix the pak 40 in the 251, still have to work on the recoil ( later )
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Wed Apr 26, 2023 8:11 pm
by simon_manning
Looks Very good yves, impressive vehicle, regards simon.
Re: Yves sdkfz 251 update
Posted: Sat Apr 29, 2023 11:06 am
by yves mouton
Thanks Simon
Still some work to do, waiting for the Tim Catton lights.
I have to work on the recoil system.....
Put some markings on.
Work on the side panels and the rear doors.
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Sat Apr 29, 2023 5:13 pm
by Tom Wittstock
Very nice job....I now wish I never sold mind....
Re: Yves sdkfz 251 update
Posted: Sat Apr 29, 2023 7:05 pm
by yves mouton
Thanks Tom,
Today i did a first test ride and it was ok.
Smoker works fine.
Still working on all the hatches side panels and rear doors ( all remote control )
If you wanted a unbuild sdkfz 251 i know someone.
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Mon May 01, 2023 6:22 pm
by yves mouton
hello,
A little update, today i put the markings on, need also a 1/6 licence plate.
Still waiting for the lights from Tim Catton.
Best regards Yves
Re: Yves sdkfz 251 update
Posted: Wed May 24, 2023 7:16 pm
by Björn Johansson
Thats a killer Yves
Re: Yves sdkfz 251 update
Posted: Fri Jun 30, 2023 10:37 am
by Dennis Jones
That's looking good Yves.
Dennis.
