yves tiger 1 update
-
- Posts: 1559
- Joined: Thu Jul 12, 2007 4:44 pm
- Location: North Lancs
- Been liked: 68 times
Hi Yves.
Really smart looking Tiger... I like it well done you have packed loads of detail into it.
Cheers Paul
Really smart looking Tiger... I like it well done you have packed loads of detail into it.
Cheers Paul
Paul's Tank Workshop. Complete Tank builds and re builds zimmerit and paint to museum quality standard. pjtigerman@aol.com
01524 720977
https://www.facebook.com/PaulsTankWorkshop
01524 720977
https://www.facebook.com/PaulsTankWorkshop
-
- Posts: 1816
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 5 times
- Been liked: 629 times
- Contact:
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
tiger 1
Hello,
Thanks Paul for your compliments, he is almost done just put the
tow cables on, the lights, MG gun flash,the animatronics and blankfire adjustment.
see you at the openday
John, i have no problem to ride forward in the car, i lower the barrel otherwise i hit the roof, if i ride out of the car i drive very
slow till the tank balance and then drive on the ramps.
There is a movie here when i drive in and out the car.
regards Yves
Thanks Paul for your compliments, he is almost done just put the
tow cables on, the lights, MG gun flash,the animatronics and blankfire adjustment.
see you at the openday
John, i have no problem to ride forward in the car, i lower the barrel otherwise i hit the roof, if i ride out of the car i drive very
slow till the tank balance and then drive on the ramps.
There is a movie here when i drive in and out the car.
regards Yves
-
- Posts: 1816
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 5 times
- Been liked: 629 times
- Contact:
Great movies. Did you do the mg swivel yourself. Looks great. i tested the MG already. Just plug and play. Looking forward to seeing your blank firer in action. I am back to working on the Tiger. Had a break so that I could do some work on the house. Started adding zimmerit. Now waiting on some parts from Steve Winstone.
- Rich Stinchcomb
- Posts: 67
- Joined: Sun Jul 15, 2007 2:38 am
- Location: Connecticut, USA
- Has liked: 3 times
- Been liked: 1 time
A Mini Cooper? I'd like to see pictures of that!John Fitzsimons wrote:Not looking forward to getting mine into a mini.
Last edited by Rich Stinchcomb on Mon Aug 01, 2011 12:15 pm, edited 1 time in total.
"All you saw in your imagination was the muzzle of an 88 behind each leaf." - British Tank Commander Andrew Wilson
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
MG movement
Hello John,
Yes the MG movement is made by me, i used a servo for the side
movement, i used the rotation knob on my graupner transmitter.
The transmitter setup was done by Sven Strobbe.
I want the MG guns connect so that they can shoot separtely
regards Yves
Yes the MG movement is made by me, i used a servo for the side
movement, i used the rotation knob on my graupner transmitter.
The transmitter setup was done by Sven Strobbe.
I want the MG guns connect so that they can shoot separtely
regards Yves
-
- Posts: 547
- Joined: Fri Aug 28, 2009 10:08 pm
- Location: South Wales Glamorgan
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
tiger 1
Thanks Nick for your fine cmopliments,
i am happy with it like it is now, maybe later on i do some
wash on it but i have no experience with washes.
There are here on the forum a lot of guys that have more skills and experience than me.
regards Yves
i am happy with it like it is now, maybe later on i do some
wash on it but i have no experience with washes.
There are here on the forum a lot of guys that have more skills and experience than me.
regards Yves
-
- Posts: 1762
- Joined: Fri Jul 13, 2007 4:53 am
- Location: Northern California
- Been liked: 177 times
- Contact:
Hi Yves
Your Tiger looks beautiful. You have done a superb job with it. Thanks for posting the photos of the blank firing unit. Those will come in handy later on.
Also nice to see our Tigers will be wearing the same tactical numbers.
Really nice photos and video. You should be very happy with your Tiger 1.
Kindest regards
Tim
Your Tiger looks beautiful. You have done a superb job with it. Thanks for posting the photos of the blank firing unit. Those will come in handy later on.
Also nice to see our Tigers will be wearing the same tactical numbers.
Really nice photos and video. You should be very happy with your Tiger 1.
Kindest regards
Tim
"So long as one isn't carrying one's head under one's arm, things aren't too bad." – Erwin Rommel
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
tactical nr
Hello Tim,
Thank you for your compliment, my tiger donth have so much
detail work like yours, in my opinion you got more skills than me
but i am happy with my work.
About the tactiacal nr, i chose the nr 223 random. It was difficult
for me what nr i wanted. My tiger is my design it is not a specific
tank from some of the Germans Abteilung.
I didn't find mutch about the totenkopf division.
For me looks the tiger 1 the best in German panzer grey,
that is my opinion ( i think thats for everyone different )
kind regards Yves
Thank you for your compliment, my tiger donth have so much
detail work like yours, in my opinion you got more skills than me
but i am happy with my work.
About the tactiacal nr, i chose the nr 223 random. It was difficult
for me what nr i wanted. My tiger is my design it is not a specific
tank from some of the Germans Abteilung.
I didn't find mutch about the totenkopf division.
For me looks the tiger 1 the best in German panzer grey,
that is my opinion ( i think thats for everyone different )
kind regards Yves
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
Re: yves tiger 1 update
Hello guys,
I made some new pictures of my tiger 1,
it was a very sunny day.
The tiger 1 is ready to go to the openday next saturday.
See you all there.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
regards Yves
I made some new pictures of my tiger 1,
it was a very sunny day.
The tiger 1 is ready to go to the openday next saturday.
See you all there.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
regards Yves
-
- Posts: 1816
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 5 times
- Been liked: 629 times
- Contact:
Re: yves tiger 1 update
Looks great. How did the animatronics go? Enjoy the day. Take lots of photos. Safe trip.
If interested in any parts used in my builds contact me at johnfitzsimons@msn.com for a price list.
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
Re: yves tiger 1 update
Hello John,
Thanks for your compliments,
my animatronics are not plug in for the moment,
still donth have the time to work on the tiger 1 and king tiger now.
Are going to the openday?
Maybe i see you there
regards Yves
Thanks for your compliments,
my animatronics are not plug in for the moment,
still donth have the time to work on the tiger 1 and king tiger now.
Are going to the openday?
Maybe i see you there
regards Yves
-
- Posts: 1816
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 5 times
- Been liked: 629 times
- Contact:
Re: yves tiger 1 update
Afraid I will not get to open day. In France on holiday until 11th. Tried to work openday into the trip but did'nt work out. Hopefully get there next year. Should have a tank finished by then.
If interested in any parts used in my builds contact me at johnfitzsimons@msn.com for a price list.
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
Re: yves tiger 1 update
Hi John,
Have a nice trip in France,
are you going to the tank museum in Saumur?
Thats a very beautiful and large museum.
Hopefully i see you next year with your tiger 1 ath the openday,
till then my KT will be ready.
regards Yves
Have a nice trip in France,
are you going to the tank museum in Saumur?
Thats a very beautiful and large museum.
Hopefully i see you next year with your tiger 1 ath the openday,
till then my KT will be ready.
regards Yves