Roy's StuG III (no. 2020/10)
-
- Posts: 165
- Joined: Wed Mar 31, 2021 4:50 pm
- Location: Falsterbo
- Has liked: 465 times
- Been liked: 405 times
Re: Roy's StuG III (no. 2020/10)
Sorry to read about you´r problem Roy , sure hope it dissolves asap.
Kind regards from Björn
- Roy Beukeveld
- Posts: 191
- Joined: Fri Feb 14, 2020 7:23 pm
- Location: The Netherlands
- Has liked: 171 times
- Been liked: 118 times
- Contact:
Re: Roy's StuG III (no. 2020/10)
Hi guys,
Problem update, the problem is gone... don't know if it's solved though.
I did some more testing and tried to find surtain relations between movements. When the problem first occurred there were no mechanical issues. Just pulling to the side. I was under the impression that therefor it must be electric.
So I took the top structure off, and disconnected all electronics not needed for driving. Tried again, no issues. Running fine. No pulling to the side, and normal power.
So I connected everything back, one by one. And surprisingly still no issues. Now everything is back on, and still functioning normal.
I drove in the woods for a few hours the past weekend without any issues.
So what was going on, I still don't know. I'll have to see if it comes back or not, trouble shooting things like these is difficult but i'm glad that its running fine again now.
Problem update, the problem is gone... don't know if it's solved though.
I did some more testing and tried to find surtain relations between movements. When the problem first occurred there were no mechanical issues. Just pulling to the side. I was under the impression that therefor it must be electric.
So I took the top structure off, and disconnected all electronics not needed for driving. Tried again, no issues. Running fine. No pulling to the side, and normal power.
So I connected everything back, one by one. And surprisingly still no issues. Now everything is back on, and still functioning normal.
I drove in the woods for a few hours the past weekend without any issues.
So what was going on, I still don't know. I'll have to see if it comes back or not, trouble shooting things like these is difficult but i'm glad that its running fine again now.
Kind regards,
Roy
Roy
-
- Posts: 165
- Joined: Wed Mar 31, 2021 4:50 pm
- Location: Falsterbo
- Has liked: 465 times
- Been liked: 405 times
Re: Roy's StuG III (no. 2020/10)
Happy for you Roy
Sure is a mess when you did so much work to find the problem.
Sure is a mess when you did so much work to find the problem.
Kind regards from Björn
- Roy Beukeveld
- Posts: 191
- Joined: Fri Feb 14, 2020 7:23 pm
- Location: The Netherlands
- Has liked: 171 times
- Been liked: 118 times
- Contact:
Re: Roy's StuG III (no. 2020/10)
Hi Björn, thank you, it's a strange thing, I have no clue what caused this.
We'll have to see if it returns on some point, but with every good drive my confidence grows. It runs perfectly now.
We'll have to see if it returns on some point, but with every good drive my confidence grows. It runs perfectly now.
Kind regards,
Roy
Roy