Build Log
Posted: Mon May 31, 2010 7:19 am
The Official Armortek Forum - World leader in one sixth scale metal kits
One sixth scale metal model kits - RC capable
https://forum.armortek.co.uk/
Build Log
Page 2 of 3
Build Log
Posted: Wed Jun 02, 2010 4:27 pm
Posted: Thu Jun 03, 2010 1:55 am
Hi David. Nice work.
I've noticed your turret fits together better than mine. Did you alter it in some way?
I've noticed your turret fits together better than mine. Did you alter it in some way?
Posted: Thu Jun 03, 2010 2:40 am
Hi David
The only changes I made was notching the top braces so the side door hinges would fit.
I still have a gap on the back side about 6mm.
Thanks
The only changes I made was notching the top braces so the side door hinges would fit.
I still have a gap on the back side about 6mm.
Thanks
Posted: Thu Jun 03, 2010 5:57 am
Hi David,
Mine also has quite a bit to fill on the side/back turret armour. It wasn't obvious to me in your pictures.
Thanks...
Mine also has quite a bit to fill on the side/back turret armour. It wasn't obvious to me in your pictures.
Thanks...
Posted: Thu Jun 03, 2010 3:54 pm
Hi David
Your Panzer III looks great!
Kind regards
Tim
Your Panzer III looks great!
Kind regards
Tim
Build Log
Posted: Mon Jun 07, 2010 1:03 am
Posted: Mon Jun 07, 2010 5:07 am
David,
Nice job on the cap!
I haven't posted here before, but given that you did such a nice job on the idler I was wondering if you had seen Jeff's fine work?
http://www.armortek.co.uk/forum/viewtop ... c&start=15
Nice job!!!
Brian
Nice job on the cap!
I haven't posted here before, but given that you did such a nice job on the idler I was wondering if you had seen Jeff's fine work?
http://www.armortek.co.uk/forum/viewtop ... c&start=15
Nice job!!!
Brian
Posted: Sun Aug 01, 2010 2:52 am
pz111
Posted: Sun Aug 01, 2010 9:45 pm
Hello
david your pz111 is coming along ,it is good to see it ,and i like your final colour scheam you intend to do .
allthe best
nick
david your pz111 is coming along ,it is good to see it ,and i like your final colour scheam you intend to do .
allthe best
nick
Build log
Posted: Sun Aug 22, 2010 11:21 pm
Spent some more time working.
Never enough time to accomplish what you want.
http://i857.photobucket.com/albums/ab13 ... 210027.jpg
Thanks for looking till next time.
Never enough time to accomplish what you want.
http://i857.photobucket.com/albums/ab13 ... 210027.jpgThanks for looking till next time.
Build Log
Posted: Sat Sep 04, 2010 8:39 pm
Added some more details.
Till next time
Thanks
Till next time
Thanks
Build Log
Posted: Sun Sep 05, 2010 8:07 pm
This is my electrical lay out. Used standoffs on modules, rerouted speaker wires out the sides, made metal brackets for speakers. On test run everything worked fine. Only problem is the machine gun sound. There is none. The smoke worked fine on the first run, now it just trickles out the sides the fan is working and the block is hot and it has oil. Any help would be welcome.
Thanks
David
Thanks
David
Posted: Mon Sep 06, 2010 8:06 am
Hi David
The machine gun sound, and all the other sounds are accessed from the Benedini card. Getting these is described in the full Benedini manual on www.benedini.de.
Your smoker sounds like it has too much oil in it. They best with absolute minimum amount.
Regards
Mark
The machine gun sound, and all the other sounds are accessed from the Benedini card. Getting these is described in the full Benedini manual on www.benedini.de.
Your smoker sounds like it has too much oil in it. They best with absolute minimum amount.
Regards
Mark
Posted: Mon Sep 06, 2010 11:32 am
Hi David,
Will your gun elevation motor clear the speakers and speed controller ?
Dennis.
Will your gun elevation motor clear the speakers and speed controller ?
Dennis.