Next Armortek model to be announced

[Simon Peck]

Hi David,

I should bring it to a show some time. I’ve been outside the UK for some years but hopefully can participate a bit more now. Until someone perfects barrel and turret stabilisation I’ll stick to older generations of tanks.

Simon

[David Brady]

I've seen that Maus in the flesh, I wonder who in the UK has this? it disappeared many years back.

Maybe this too was blown up.

I've owned a couple of hevaly modified 1/4 scale tanks in the past, the largest being a king tiger, Interestingly both tiger and King Tiger would fit in my VW touran (not at the same time) but could be transported about.

Cheers

[Gerhard Michel]

Well, it's possible to load an 1/4 scale King Tiger into a car. But where is then the driver....?

[David Brady]

Unless I'm missing something, the driver is in the front seat
DB

[keithbraun]

]How about the rare SdKfz 8 DB10 artillery tractor? Would make an excellent addition to the 88. Not knowing how the manufacturing process works at Armortek, but I'm guessing that most of the running gear patterns already exist with the Famo?

[keithbraun]

sdfz 8 t armoured Polish2.jpg (67.96 KiB) Viewed 929 times

[Oliver Bergmüller]

Hello everyone,
I am a newcomer in the field of model aircraft construction and have now ordered an ARMORTEK Leopard 2A4.
I have no experience in tank model building and hope to get feedback on my questions here.
1, when do I paint which parts and do I have to prime everything beforehand or paint it straight away?
2, where can I find literature about the respective coloring of the Leopard.
3, which parts need to be greased
4, which parts of the tank have to be filled
5, what do I have to pay special attention to when assembling?

Many thanks in advance

[Marco Peter]

Hello everyone,
I am a newcomer in the field of model aircraft construction and have now ordered an ARMORTEK Leopard 2A4.
I have no experience in tank model building and hope to get feedback on my questions here.
1, when do I paint which parts and do I have to prime everything beforehand or paint it straight away?
2, where can I find literature about the respective coloring of the Leopard.
3, which parts need to be greased
4, which parts of the tank have to be filled
5, what do I have to pay special attention to when assembling?

Well Oliver, my first and best piece of advice is to ask questions at the correct place on the forum!

[Oliver Bergmüller]

Hallo Marco,
sorry, ich bewege mich das erste mal in einem Forum.
Wo bin ich den richtig ?

[Marco Peter]

Hallo Marco,
sorry, ich bewege mich das erste mal in einem Forum.
Wo bin ich den richtig ?

The forum is divided per model, so the Leopard 2A4 section sounds appropriate.

viewforum.php?f=69

[Peter Quambusch]

Hallo Oliver, ich habe dir eine PM geschrieben. Gruß Peter