Just wondering
Dose anyone know how many links per side go on the panther A tank?
Re: Panther Jagdpanther tracks
Posted: Sat Nov 19, 2016 3:47 pm
by Kent Wiik
Hi Ross,
On all Panthers (Ausf D, A, G and Jagdpanther) it was 86 links / side.
Kind regards
Kent
Re: Panther Jagdpanther tracks
Posted: Sat Nov 19, 2016 9:01 pm
by Russ Clark
OK Thanks
Re: Panther Jagdpanther tracks
Posted: Sun Nov 20, 2016 2:45 am
by vincent hung shu yue
Hi all
In case there is broken, damage track, pins or collars, please let me know and will replace later.
Vincent
Re: Panther Jagdpanther tracks
Posted: Sun Feb 26, 2017 10:03 am
by vincent hung shu yue
Hi All
Still have one set available because one order back out.
Cheers
Vincent
Re: Panther Jagdpanther tracks
Posted: Sat Jun 17, 2017 5:41 pm
by vincent hung shu yue
After completing the steel tracks , I found out the track link can not sit on the centre of the driving teeth. So this need a minor alternation between the distance of the two driving teeth. For measurement, it need to be wider for 2 mm. But I just put two 0.75mm spacer to enlarge . That is 1.5 mm. And the outcome is very good. Here is the photos.
Regards
Vincent
Re: Panther Jagdpanther tracks
Posted: Sat Jun 17, 2017 10:11 pm
by Gerhard Michel
I would prefer to make a 'starhex' spacer fitting the shape of the sprocket.........
Re: Panther Jagdpanther tracks
Posted: Mon Jul 10, 2017 3:17 pm
by vincent hung shu yue
After widen the two driving teeth for 1.5mm, and below is the test run. It sound good. Actually 1.5 to 2 mm are both fine.
Vincent
Re: Panther Jagdpanther tracks
Posted: Mon Jul 10, 2017 10:59 pm
by Gerhard Michel
I also made test runs with the unchanged sprocket width before driving outside, and all these runs at the testing bench were satisfying. Only in the field, with turns upon grass and earth, my problems began........
Re: Panther Jagdpanther tracks
Posted: Tue Jul 11, 2017 1:45 am
by Russ Clark
I got these tracks for my panther A some fit well some way off, a wish I saved my casb
