I am attempting to install the machine gun option pack, and just wondering how others have attached the wire linkage. The wire with the 90 degree bend as supplied in the kit, does not reach the servo arm nor does it align with it (the servo arm does not extend out enough in length). It would require two bends to reach it laterally and vertically. Is that what is supposed to happen? Maybe I am just missing something here.
Thanks.
Machine Gun servo and linkage
-
Adrian Harris
- Posts: 5073
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1419 times
- Been liked: 1594 times
Re: Machine Gun servo and linkage
Looks like the picture in the manual might be wrong and the servo fits through the hole rather being mounted behind it.
Adrian.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
Ray Massa
- Posts: 141
- Joined: Wed Jan 18, 2023 9:44 pm
- Location: Michigan, USA
- Has liked: 18 times
- Been liked: 116 times
Re: Machine Gun servo and linkage
Adrian,
I just needed to reverse the servo mount position. Sometimes I just miss the obvious. But I originally wanted the servo wire to feed from the bottom, so that is why I mounted it the way I did.
-Ray
I just needed to reverse the servo mount position. Sometimes I just miss the obvious. But I originally wanted the servo wire to feed from the bottom, so that is why I mounted it the way I did.
-Ray