John's Early Tiger 1

[neil graham]

Very impressive detail and great videos. Love the railways you have in the loft & garden as well.

[John Fitzsimons]

Very impressive detail and great videos. Love the railways you have in the loft & garden as well.

Hi Neil, railway is confined to garden at the moment. I keep most of the rolling stock in the workshop. Railway is next to workshop. This year I was focused on getting the 0 gauge running. There will be 00 gauge also on lower level.

[John Fitzsimons]

I have made some more progress with the Early Tiger 1. Still working on small details around the hull.
Bear in mind this Tiger is build from bits and pieces of different releases and I am filling the gaps by making required parts.
I have added a new video but I am afraid sound was all over the place. I got a new camera and am having problems getting sound from microphones balanced with camera.
The video does cover fitting of my rear mudguards which I have made specially for the early model Tiger 1.

[John Fitzsimons]

I have made some more progress with the Early Tiger 1. Still working on small details around the hull.
Bear in mind this Tiger is build from bits and pieces of different releases and I am filling the gaps by making required parts.
I have added a new video but I am afraid sound was all over the place. I got a new camera and am having problems getting sound from microphones balanced with camera.
The video does cover fitting of my rear mudguards which I have made specially for the early model Tiger 1.

[John Fitzsimons]

Here are the latest additions to my Early Tiger 1.

I have made the components to attach the track cables to the side of the hull. These are functional.
I made wooden handles for the shovel, axe and hammer. Hopefully I will be able to get some Armorpax tool clamps to finish fitting.

I have also made a steel pry bar. A watertight cover for the engine bay hatch. I have also started work on the components for latches on the rear deck. I don’t have the parts from the kit.

I have also added my jack block.

See how it all goes together on the YouTube video and don’t forget to Subscribe to the channel.

[John Fitzsimons]

I have added the tool clamps and turret track hangers from Armorpax.

DSC_1084.JPG (87.77 KiB) Viewed 1572 times

DSC_1081.JPG (80.56 KiB) Viewed 1572 times

DSC_1078.JPG (106.65 KiB) Viewed 1572 times

DSC_1079.JPG (94.42 KiB) Viewed 1572 times

Here is a video covering assembling and fitting these kits.

[John Fitzsimons]

I have been busy on the early tiger 1. More modifications made so hope to have another video soon.

Looking at the escape hatch in the turret, I have attempted to make operating hatches before, now with the aid of mill and lathe I am trying to improve the end result. Here are some photos of current status. Stay tuned for next video for full detail.

IMG_5713.jpeg (108.14 KiB) Viewed 1472 times

IMG_5714.jpeg (93.13 KiB) Viewed 1472 times

IMG_5715.jpeg (94.41 KiB) Viewed 1472 times

Still working on the hatch hinge shape and attachment.

[John Fitzsimons]

I Have not had reason to moan about the Tiger Kits, indeed they seem to get better with each release. I would suggest that Armortek look at the side turret hatch and try to improve. I do not expect fully detailed but something that can be worked on by builders would I think be welcome. Armortek machines could knock these hatches a lot easier than my tiny machine.

[John Fitzsimons]

Some photos of my turret side hatch. Video coming soon.

DSC_1158.jpeg (75.84 KiB) Viewed 1373 times

DSC_1196.jpeg (83.35 KiB) Viewed 1373 times

DSC_1197.jpeg (63.37 KiB) Viewed 1373 times

DSC_1198.jpeg (72.99 KiB) Viewed 1373 times

DSC_1202.jpeg (79.82 KiB) Viewed 1373 times

[Tim Carr]

Love those pics!

Should also add NICE WORK!

Later Tim

[John Fitzsimons]

Thanks Tim.

Here is a video covering the latest work on the Tiger 1.

[John Fitzsimons]

I have done some work on detailing my kit turret bin. My original turret bin was the old version with white metal cast top and bottom. I picked up components from the parts piles at the factory open day enabling me to make this much lighter bin. I have added many details to enhance the kit piece. I will put a video up soon detailing the work involved in detailing the turret bin.

DSC_1254.jpeg (97.17 KiB) Viewed 1252 times

DSC_1255.jpeg (101.68 KiB) Viewed 1252 times

DSC_1256.jpeg (99.06 KiB) Viewed 1252 times

DSC_1257.jpeg (74.85 KiB) Viewed 1252 times

DSC_1258.jpeg (74.52 KiB) Viewed 1252 times

DSC_1259.jpeg (77.09 KiB) Viewed 1252 times

DSC_1260.jpeg (92.91 KiB) Viewed 1252 times

DSC_1261.jpeg (96.6 KiB) Viewed 1252 times

DSC_1262.jpeg (87.73 KiB) Viewed 1252 times

DSC_1263.jpeg (92.83 KiB) Viewed 1252 times

DSC_1264.jpeg (73.55 KiB) Viewed 1252 times

DSC_1265.jpeg (81.29 KiB) Viewed 1252 times

DSC_1267.jpeg (88.68 KiB) Viewed 1252 times

DSC_1269.jpeg (88.22 KiB) Viewed 1252 times

[John Fitzsimons]

Here is a video on detailing the Tiger 1 turret. If you like the video or find it useful please remember to support the channel by subscribing, liking and sharing the video. Please comment on Youtube video if any queries.

[Robert E Morey]

Great stuff John, really enjoy your builds and video. One the left side of the turret is a flat plate bolted next to tow cables. What is that plate for? some kind of tool for something - supporting the jack perhaps?
Best regards,
Bob

[John Fitzsimons]

Hi Bob,
It’s a cover for the engine bay hatch. I guess for the for submersion to seal the hatch when feifels removed.