Mr Dawe's Centurion.

Forum for discussion relating to the Centurion
Post Reply
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Enjoy your build "H"!
Bollards and meteors.
Attachments
Bollards......nice.
Bollards......nice.
IMG_20220629_132413.jpg
Lots of support structure
Lots of support structure
A little adjustment for the brass bits.
A little adjustment for the brass bits.
IMG_20220629_133136.jpg
IMG_20220629_133319.jpg
IMG_20220629_143526.jpg
Cleaning up the parts is tedious but necessary
Cleaning up the parts is tedious but necessary
IMG_20220629_160356.jpg
IMG_20220629_161039.jpg
IMG_20220629_161052.jpg
IMG_20220629_170011.jpg
IMG_20220629_170018.jpg
IMG_20220629_170024.jpg
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Dawe
Posts: 290
Joined: Sat Aug 30, 2014 5:49 pm
Has liked: 754 times
Been liked: 276 times

Re: Mr Dawe's Centurion.

Post by Phil Dawe »

Phil, the engine is progressing nicely :) Loving the bollards now they are in place!
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

All afternoon on the printed Merlin headers, the printed pieces became the base for the Meteor headers
Attachments
IMG_20220630_134529.jpg
IMG_20220630_162755.jpg
IMG_20220630_162812.jpg
IMG_20220630_073841.jpg
IMG_20220630_172415.jpg
IMG_20220630_172440.jpg
IMG_20220630_172445.jpg
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

It will be quiet on the Woollard front today as my hands need a rest so I'm off to the Devon county show.
Parts for the Meteor will still be printing while I'm out though!
Attachments
IMG_0915.jpg
IMG_0915.jpg (119.52 KiB) Viewed 1510 times
Coolant link tubes and magnetos
Coolant link tubes and magnetos
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

We are having a break from the engine ( still printing parts though) and started on the rear deck detailing, which there is far more than you would think.
Attachments
Before and after
Before and after
More engine parts to be modified
More engine parts to be modified
Removing the rubbers.
Removing the rubbers.
IMG_20220704_135847.jpg
IMG_20220704_140428.jpg
IMG_20220704_141144.jpg
Pinned and bonded but a little heat gets these off
Pinned and bonded but a little heat gets these off
3mm end mill
3mm end mill
IMG_20220704_144749.jpg
Some very necessary machining required
Some very necessary machining required
IMG_20220704_171050.jpg
Very fiddly work but worth the effort
Very fiddly work but worth the effort
IMG_20220704_171107.jpg
12ba about as small as I like to work with. 12ba x 1/4 Mr D!
12ba about as small as I like to work with. 12ba x 1/4 Mr D!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Dawe
Posts: 290
Joined: Sat Aug 30, 2014 5:49 pm
Has liked: 754 times
Been liked: 276 times

Re: Mr Dawe's Centurion.

Post by Phil Dawe »

Copied Mr W! I will order some tomorrow :) Great work today!
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Tuther side this afternoon.
Attachments
Smoke unit arrived today.
Smoke unit arrived today.
Lovely references in here.
Lovely references in here.
Just in case I want to check the fuel float levels
Just in case I want to check the fuel float levels
IMG_20220705_144107.jpg
That's those out the way
That's those out the way
IMG_20220705_160809.jpg
IMG_20220705_160836.jpg
I have to turn this into that
I have to turn this into that
A blank canvas or what.
A blank canvas or what.
IMG_20220705_170238.jpg
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

The engine hatches .
Attachments
Dressing the corners square
Dressing the corners square
Hand filing !
Hand filing !
Removing material from the rear to thin up the look from the top surface, the folded section can then be lowered but that's for tomorrow.
Removing material from the rear to thin up the look from the top surface, the folded section can then be lowered but that's for tomorrow.
You would think that these machined pieces would be perfectly flat and true but they are far from it, some aluminium stock has internal forces that can cause the piece to bow when material is removed
You would think that these machined pieces would be perfectly flat and true but they are far from it, some aluminium stock has internal forces that can cause the piece to bow when material is removed
IMG_20220706_170642.jpg
4 of the 5 internal faces machined
4 of the 5 internal faces machined
Last edited by Phil Woollard on Thu Jul 07, 2022 7:16 am, edited 1 time in total.
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Dawe
Posts: 290
Joined: Sat Aug 30, 2014 5:49 pm
Has liked: 754 times
Been liked: 276 times

Re: Mr Dawe's Centurion.

Post by Phil Dawe »

Impressive! it takes real skill to file so accurately Phil!
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Good Old craft apprenticeship for the Queen Mr D. It's baking in the workshop but got lots done before it reaches 40° in there.
Attachments
Lots more machining and small parts to make here
Lots more machining and small parts to make here
Not much hand filing today the mill is great for these
Not much hand filing today the mill is great for these
That tiny green part from the 1/35 is very good reference.
That tiny green part from the 1/35 is very good reference.
IMG_20220707_145922.jpg
Nice sunny day for curing the paint.
Nice sunny day for curing the paint.
Phil has ordered some new rubber.
Phil has ordered some new rubber.
IMG_20220707_160210.jpg
I hope those 12ba get here soon as I'm out.
I hope those 12ba get here soon as I'm out.
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Dawe
Posts: 290
Joined: Sat Aug 30, 2014 5:49 pm
Has liked: 754 times
Been liked: 276 times

Re: Mr Dawe's Centurion.

Post by Phil Dawe »

12BA should be tomorrow. The rubber should arrive here tomorrow also
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Lots done this afternoon
Attachments
£260 quid worth of 12ba there.
£260 quid worth of 12ba there.
After watching a jeweler removing the back of my watch it gave me the idea of using a pencil rubber to turn the delicate bolts, works a treat .
After watching a jeweler removing the back of my watch it gave me the idea of using a pencil rubber to turn the delicate bolts, works a treat .
IMG_20220708_145738.jpg
If you look closely you can just make out all those 12ba.
If you look closely you can just make out all those 12ba.
Putting the locks together
Putting the locks together
There's so much detail to add
There's so much detail to add
Turning the hatch locks x5
Turning the hatch locks x5
IMG_20220708_165554.jpg
IMG_20220708_165607.jpg
IMG_20220708_165959.jpg
Handles next
Handles next
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7147 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Those vertical plates, I have no idea what they are for .....maybe tie downs as they have holes drilled them?
Attachments
IMG_20220711_092402.jpg
IMG_20220711_094545.jpg
I don't have a 2mm slot drill so I've used a centre drill instead.
I don't have a 2mm slot drill so I've used a centre drill instead.
IMG_20220711_160853.jpg
I'm not keen on brass for these models, why, because when the paint gets knocked or chipped the bright brass looks ridiculous.
I'm not keen on brass for these models, why, because when the paint gets knocked or chipped the bright brass looks ridiculous.
I think I'm going to use 1mm pegs to fix them
I think I'm going to use 1mm pegs to fix them
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
Top
Stephen White
Site Admin
Posts: 3110
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 1023 times
Been liked: 2093 times
Contact:
Contact Stephen White

Re: Mr Dawe's Centurion.

Post by Stephen White »

"£260 quid worth of 12ba there."

Phil, for what it's worth, I've returned to using Knupfer again. Their service is first class and postage very reasonable. I've recently bought 500 M1.2 x8 set screws and 100 M1.2 nuts for just under £100.
Top
User avatar
John Clarke
Posts: 1633
Joined: Sun Oct 17, 2010 10:06 pm
Location: Staffordshire
Been liked: 1731 times

Re: Mr Dawe's Centurion.

Post by John Clarke »

Nice detailing Phil. Subtle, not obvious. (British Armor. 8) )

M1.2mm nuts & set screws. Hmmmmm, do I sniff a Clan Leader post in the near future Stephen? :wink:
Oh Man, I only ride em I don't know what makes them work,
Definatley an Anti-Social type
Top
Post Reply

Return to “Centurion”